Set Pin Code - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes

Set PIN Code

~
www.balluff.com
Determine the desired characters for the PIN code, then convert to hexadecimal
Chart on page 313 on the inside back cover of this manual.
and examples for setting this feature.
$CBTPC
Set 4-character Bluetooth PIN Code
CANCEL
DEFAULT
See page 271
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by
the hexadecimal digits from the Alphanumeric
characters in Appendix D: Keypad
ing your desired character(s). End by reading
the ENTER/EXIT barcode again.
$CBTP6
Set 16-character Bluetooth PIN Code
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
31323334 = Default PIN Code is 1234
using the ASCII
for detailed information
represent-
227