Docking Beep; Leash Alarm - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes

Docking Beep

Leash Alarm

212
Enables/disables a beep indication when the handheld is placed in the Base Station.
$CBTCB01(C
Docking Beep = Enable
This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)
when the handheld goes out of range. This is especially useful in instances where the reader
might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station. If the reader is asleep
or disconnected from the Base Station, there is no way for it to know where it is relative to the
Base Station because communication is not active between the devices.
DEFAULT
$CBTLB01(CR
Leash Alarm = 1 Second
$CBTLB03(CR
Leash Alarm = 3 Seconds
$CBTCB00(CR
Docking Beep = Disable
DEFAULT
$CBTLB00(CR
Leash Alarm = Disabled
$CBTLB02(CR
Leash Alarm = 2 Seconds