Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
3
Configuration Using Barcodes
3.9
2D Symbologies
3.9.1 2D Global
Features
www.balluff.com
2D Global Features
The reader supports the following 2D symbologies (barcode types). Symbology-dependent
options for each symbology are included in this chapter. See
page 87 for configuration of 1D barcodes.
The following features are common to all, or in some cases, most of the available 2D symbolo-
gies. Default settings are indicated at each feature/option with a green arrow. Also reference
Appendix C: Standard Defaults
tings. That section also provides space to record any custom settings needed or implemented for
your system.
To set most features:
1 Scan the ENTER/EXIT PROGRAMMING barcode at the top of applicable programming
pages.
2 Scan the correct barcode to set the desired programming feature or parameter. You may need
to cover unused barcodes on the page, and possibly the facing page, to ensure that the
reader reads only the barcode you intend to scan.
3 If additional input parameters are needed, go to
ate characters from the keypad.
Additional information about many features can be found in the "References"
chapter.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.
NOTE
Complete the programming sequence by reading the ENTER/EXIT PROGRAMMING barcode to
exit Programming Mode.
for a listing of the most widely used set of standard factory set-
Appendix D:
"1D Symbologies"
starting on
Keypad, and scan the appropri-
175