Balluff BVS HS-P Series Operation Manual
  1. Manuals
  2. Brands
  3. Balluff Manuals
  4. Barcode Reader
  5. BVS HS-P Series
  6. Operation manual

Balluff BVS HS-P Series Operation Manual

Industrial handheld barcode readers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Operation Manual
english

Advertisement

Table of Contents
loading

Related Manuals for Balluff BVS HS-P Series

Summary of Contents for Balluff BVS HS-P Series

  • Page 1 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Operation Manual english...
  • Page 2 An electronic version of this document is downloadable from the Balluff website (www.Balluff.com). If you visit our website and would like to make comments or suggestions about this or other Balluff publications, please let us know via the "Contact" page.
  • Page 3 Overview ......................... 11 Manual Conventions ....................... 12 References ........................... 12 Technical Support ......................... 12 Balluff Website Support ....................12 Telephone Technical Support ..................12 About the Reader ......................... 12 The Base Station BAM-MD-VS-001 Base Station/Charger ........... 13 Battery Safety ........................13 Programming the Reader ......................
  • Page 4 Balluff BVS HS-P Family Industrial Handheld Barcode Readers RS-232/USB-Com Interfaces ....................37 Intercharacter Delay ....................38 Beep On ASCII BEL ....................38 Beep On Not on File ....................39 ACK NAK Options ..................... 39 ACK Character ......................40 NAK Character ......................40 ACK NAK Timeout Value ....................
  • Page 5 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Multiple Label Reading ....................85 Multiple Labels per Frame ....................85 Multiple Labels Ordering by Code Symbology ............85 Multiple Labels Ordering by Code Length ..............86 1D Symbologies ........................87 Disable All Symbologies ....................88 Code EAN/UPC ......................
  • Page 6 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Code 39 Danish PPT Enable/Disable ............... 116 Code 39 LaPoste ......................117 Code 39 LaPoste Enable/Disable ................117 Code 39 PZN ....................... 118 Code 39 PZN Enable/Disable .................. 118 Code 128 ........................119 Code 128 Enable/Disable ..................
  • Page 7 Balluff BVS HS-P Family Industrial Handheld Barcode Readers ABC Codabar ....................... 149 ABC Codabar Enable/Disable ................... 149 ABC Codabar Concatenation Mode ................. 149 ABC Codabar Dynamic Concatenation Timeout ............150 ABC Codabar Force Concatenation ................. 151 Code 11 ........................152 Code 11 Enable/Disable ...................
  • Page 8 Balluff BVS HS-P Family Industrial Handheld Barcode Readers China Sensible Code Set Length 1 ................181 China Sensible Code Set Length 2 ................181 Data Matrix ........................182 Data Matrix Enable / Disable ..................182 Data Matrix Square/Rectangular Style ..............182 Data Matrix DPM Decoding Safety ................
  • Page 9 Balluff BVS HS-P Family Industrial Handheld Barcode Readers RF Batch Mode Transmit Delay ................216 Direct Radio Autolink ..................... 217 RF Address Stamping ....................218 Source Radio Address Transmission ................ 218 Source Radio Address Delimiter Character ............... 218 Real Time Clock (RTC) Configuration ................220 Current Date ......................
  • Page 10 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Character Conversion ....................259 Reading Parameters ......................260 Good Read LED Duration ..................... 260 Reading Features ....................... 261 Scan Mode ........................261 Stand Mode Off Time ....................262 Reading Active Time ..................... 263 Aiming Duration Time ....................
  • Page 11 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Introduction 1 Introduction About this This Operation Manual (OPM) is provided for users seeking advanced technical information, Manual including connection, programming, maintenance and specifications. The Quick Reference Guide (QRG) and other publications associated with this product are downloadable free of charge from the website listed on the back cover of this manual.
  • Page 12 Balluff products. The site offers product support, product manuals and contact informa- Support tion. 1.3.2 Telephone If you do not have internet or email access, you may contact Balluff technical support. Check the back cover of this document for the contact information. Technical Support About the Reader The Balluff BVS HS-Px series is a family of feature-rich and rugged area image readers.
  • Page 13 To reinstall, charge and/or perform any other action on the battery, follow the instructions in this manual. Before installing the Battery, read “Battery Safety” on this and the following pages. Balluff recommends annual replacement of rechargeable battery packs to ensure maximum performance. NOTE...
  • Page 14 Always charge the battery at 0° - 40°C temperature range. Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Balluff reseller. The use of any other power supplies can damage the device and void your warranty.
  • Page 15 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Introduction Collect and recycle waste batteries separately from the device in compliance with European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/19/EU and subsequent modifica- tions, US and China regulatory and others laws and regulations about the environment.
  • Page 16 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Introduction...
  • Page 17 Unpacking Check carefully to ensure the reader and any accessories ordered are present and undamaged. If any damage occurred during shipment, contact Balluff Technical Support. Information is shown page KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original shipping container.
  • Page 18 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup 2.2.1 Connecting the Cable (Corded versions) A. Rubber gasket B. Cable Holder C. Cover D. Connector Holder 1 Slip the cable through the Cover. 2 Push the Rubber Gasket onto the Cable Holder.
  • Page 19 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup Configuring the To set up your Base station cradle you must: Base Station 1 Physically install the cradle. 2 Make all system connections. 3 Configure the Base station cradle. Mounting the...
  • Page 20 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup Figure 2: Changing the Bracket 2.4.2 Permanent For either desktop or wall mounting, the cradle can be fastened directly to a flat surface using Mounting screws (not included). When mounting on drywall, the base should be screwed to a wall stud or sup- porting beam for additional support.
  • Page 21 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup Mounting the 1 Affix the metal plate onto the desired mounting surface using the two center screw holes (see Metal Plate Figure 4 on page 21). 2 Remove the adhesive strips protecting the mounting tabs on the cradle, shown in...
  • Page 22 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup Attaching the Alternatively, the mount can be attached first to the base, then both can be mounted to a wall as Metal Plate to described above. Base Figure 5: Attaching Mounting Plate to Base Base with Mount attached 2.4.4 System...
  • Page 23 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup 2.4.5 Connecting and The Base station can be connected to a Host by means of a multi-interface cable, which must be simply plugged into the Host connector, visible on the front panel of the cradle.
  • Page 24 Quick Reference. Once the pairing is complete, you can configure the Base station cradle by reading configuration barcodes in this manual. To configure the Base station using the Balluff BVS HS-PB reader models (paired to the cradle with the Bind command), follow the procedure according to the interface selected.
  • Page 25 55 P,HA2B,P(CR) USB Keyboard with alternate key encoding Select USB Alternate Keyboard HA2C,P(CR) USB Keyboard for Apple computers Select USB-KBD-APPLE Download the correct USB Com driver from www.balluff.com KEYBOARD FEATURES P,HA2B,P(CR) USB Keyboard with alternate key encoding Set KEY- BOARD...
  • Page 26 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup Customizing Configuration Settings 2.6.1 Configure If after reading the interface barcode from the previous table, your installation requires you to Interface Settings select options to further customize your reader, turn to the appropriate section for your interface type in "Configuration Parameters"...
  • Page 27 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup 2.6.6 Resetting the Product Configuration to Defaults Restore Custom If you aren’t sure what programming options are in your imager, or you’ve changed some options Defaults and want to restore the Custom Default Configuration that may have been saved in the reader, scan the Restore Custom Default Configuration barcode below.
  • Page 28 Adapter in Serial puter. Port Profile 3 Use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff (Slave) Mode reader." If you receive an error message, it may be necessary to disable security on the device. 4 Use an RS-232 terminal program to see incoming data on the port designated by the com- puter's Bluetooth manager.
  • Page 29 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup The BVS HS-PQ can be set up to require a PIN code when connecting. If you want to set up a PIN, or when adding new equipment to a system that uses a custom security PIN, please see "Bluetooth PIN Code"...
  • Page 30 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Setup...
  • Page 31 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes This and following sections provide programming barcodes to configure your reader by changing the default settings. For details about additional methods of programming, see "Configuration Methods" on page You must first enable your BVS HS-P reader to read barcodes in order to use this section.
  • Page 32 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes For more detailed descriptions, programming information and examples for setting selected con- figuration items, see References, starting on page 237. Global Interface The following interface features are configurable by all interface types.
  • Page 33 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes RS-232 Only Interface ON PAGE ON PAGE ON PAGE ARITY ON PAGE ANDSHAKING ONTROL ON PAGE Use the programming barcodes in this section if modifications to the standard RS-232 interface settings are necessary to meet your system’s requirements.
  • Page 34 Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes Baud Rate page 238 for information on this feature. $CR2- Baud Rate = 1200 $CR2- Baud Rate = 2400 $CR2- Baud Rate = 4800 $CR2- Baud Rate = 9600...
  • Page 35 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Data Bits This parameter allows the reader to interface with devices requiring a 7-bit or 8-bit ASCII protocol for sending and receiving data. CR2- 7 Data Bits CR2- DEFAULT...
  • Page 36 Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes Handshaking page 238 for more information about this feature. Control R2HC00(C DEFAULT Handshaking Control = RTS 2HC01(C Handshaking Control = RTS/CTS 2HC02(C Handshaking Control = RTS/XON/XOFF 2HC03(C Handshaking Control = RTS On/CTS...

  • Page 37: Table Of Contents

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes RS-232/USB- Com Interfaces NTERCHARACTER ELAY ON PAGE ASCII BEL ON PAGE OT ON ON PAGE ACK NAK O PTIONS ON PAGE ACK C HARACTER ON PAGE NAK C HARACTER...
  • Page 38 Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes This parameter specifies the intercharacter delay between the end of one character and the Intercharacter Delay beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments.

  • Page 39: Beep O N Not On File On Page

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Beep On Not on This option enables/disables the action of the reader to sound a three beep sequence upon File receiving a Not-On-File (NOF) host command. NF00(CR Beep On Not On File = Disable...

  • Page 40: Nak Character On Page

    Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes ACK Character This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII characters or any hex value from 0 to 0xFF can be selected. See page 240 for more information.
  • Page 41 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ACK NAK This option specifies the amount of time the reader waits for an ACK character from the host fol- Timeout Value lowing label transmission. The selectable timeout range is 200 milliseconds to 15,000ms (15 sec- onds) in 200ms increments.

  • Page 42: Ack Nak Error Handling On Page

    Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes ACK NAK Error This feature specifies the method the reader uses to handle receive errors detected while waiting Handling for an ACK character from the host. EH00(CR DEFAULT...

  • Page 43: Disable Character On Page

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Disable Specifies the value of the RS-232 host command used to disable the reader. Character ASCII characters or any hex value from 0 to 0xFF can be selected. Setting to previously defined characters such as XON, XOFF, or host commands conflicts with normal operation of these characters.
  • Page 44 Balluff BVS HS-P Family Industrial Handheld Bar Code Readers Configuration Using Barcodes...
  • Page 45 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes Keyboard EMULATION OUNTRY ON PAGE Settings ONTROL HARACTERS ON PAGE EDGE UIET NTERVAL ON PAGE NTERCODE ELAY ON PAGE TATE ON PAGE UMLOCK ON PAGE USB K...
  • Page 46 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Country Mode This feature specifies the country/language supported by the keyboard. Several languages are supported: $CKB- DEFAULT Country Mode = U.S. $CKB- Country Mode = Belgium $CKB- Country Mode = Britain Supports only the interfaces listed in the Country Mode feature description.
  • Page 47 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CKB- Supports only the interfaces listed in the Coun- try Mode feature description. Country Mode = French Canadian $CKB- Country Mode = Germany $CKB- Supports only the interfaces listed in the Coun- try Mode feature description.
  • Page 48 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CKB- Supports only the interfaces listed in the Country Mode feature description. Country Mode = Poland $CKB- Supports only the interfaces listed in the Coun- try Mode feature description.
  • Page 49 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Send Control This feature specifies how the reader transmits ASCII control characters to the host. Reference Characters Appendix E: Scancode Tables for more information about control characters. Options are as follows: Control Character 00 : Characters from 00 to 0x1F are sent as control character Ctrl+Keys, spe- cial keys are located from 0x80 to 0xA1.
  • Page 50 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Wedge Quiet Specifies amount of time to look for keyboard activity before reader breaks keyboard connection Interval in order to transmit data to host. The selectable range for this setting is 00 to 990 milliseconds (00-0x63 by 01) in increments of ten milliseconds.
  • Page 51 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Caps Lock This option specifies the format in which the reader sends character data. This does not apply State when an alternate key encoding keyboard is selected. $CKB- DEFAULT...
  • Page 52 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes USB Keyboard This option specifies the USB poll rate for a USB keyboard. Speed This feature applies ONLY to the USB Keyboard interface. NOTE $CKB- DEFAULT USB Keyboard Speed = 1ms...
  • Page 53 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CKB- USB Keyboard Speed = 9ms $CKB- USB Keyboard Speed = 10ms USB Keyboard This option Controls whether numeric characters will be sent using standard keys or the numeric Numeric keypad.
  • Page 54 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes...
  • Page 55 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes USB-OEM Interface USB-OEM D EVICE SAGE ON PAGE NTERFACE PTIONS ON PAGE Feature settings for USB interfaces differ depending upon which host type the reader will be con- nected with.
  • Page 56 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.5.1 USB-OEM The USB-OEM protocol allows for the reader to be identified as one of two different types of bar- code readers. Depending on what other readers you may already have connected to a USB-OEM Device Usage POS, you may need to change this setting to enable all devices to communicate.
  • Page 57 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes Data Format LOBAL REFIX UFFIX EADER ERMINATOR ON PAGE AIM ID LOBAL ON PAGE starting on page 62 ABEL Label ID: Pre-Loaded Sets Individually Set Label ID Label ID Control Label ID Symbology Selection −...

  • Page 58: Configuration Using Barcodes

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.6.1 Global Prefix/ This option sets up to 20 characters each from the set of ASCII characters or any hex value from 00 to FF. The characters may be added as a prefix (in a position before the barcode data, also...
  • Page 59 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.6.2 Global AIM ID This feature enables/disables addition of AIM IDs for all symbology types. NOTE AIM label identifiers (as opposed to custom characters you select yourself as with label identifiers) can be included with readed barcode data.
  • Page 60 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes DATABAR EXPANDED DATABAR EXPANDED COMPOSITE DATABAR LIMITED DATABAR LIMITED COMPOSITE DATA MATRIX EAN128 EAN128 COMPOSITE EAN13 EAN13 P2 EAN13 P5 EAN13 COMPOSITE EAN8 EAN8 P2 EAN8 P5 EAN8 COMPOSITE...
  • Page 61 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes POSTNET QR CODE TRIOPTIC UPCA UPCA P2 UPCA P5 UPCA COMPOSITE UPCE UPCE P2 UPCE P5 UPCE COMPOSITE Set AIM ID This feature configures a Label ID individually for the GS1-128 symbology and the programming Individually for for this works the same way as Label ID.

  • Page 62: Global Aim Id On Page

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.6.3 Label ID A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the ASCII Chart on the inside back cover of this manual), used to identify a barcode symbology type. It can be appended previous to or following the transmitted barcode data depending upon how this option is enabled.

  • Page 63: Label Id Control

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Label ID Control This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbol- ogy type. IDCO00(CR) DEFAULT Label ID Transmission = Disable...
  • Page 64 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $C3BID $CC1ID Set EAN 13 Label ID Character(s) Set Code 11 Label ID Character(s) $C3MID $CC8ID Set EAN 13 Composite Label ID Character(s) Set Code 128 Label ID Character(s)
  • Page 65 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CF2ID $CLCID Set Follett 2 of 5 Label ID Character(s) GSI DataBar Limited Composite Label ID Character(s) $CG2ID $C4BID Set GS1 DataBar 14 Label ID Character(s) Set GTIN 2 Label ID Character(s)
  • Page 66 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CPGID $CISID Set ISBN Label ID Character(s) Set Portugal Postal Code Label ID Character(s) $CINID $CPNID Set ISSN Label ID Character(s) Set Postnet Label ID Character(s) $CPKID $CPJID Set Japan Postal Code Label ID Character(s)

  • Page 67: Label Id Symbology Selection − 2D Symbologies

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Label ID Symbology − Selection $CAZID $CMXID Symbologies Set Maxicode Label ID Character(s) Set Aztec Label ID Character(s) $CCSID $CP4ID Set China Sensible Label ID Character(s) Set PDF 417 Label ID Character(s)

  • Page 68: Case Conversion

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Case This feature allows conversion of the case of all alphabetic characters to upper or lower case. Conversion Case conversion affects ONLY readed barcode data, and does not affect Label ID, Prefix, Suffix, or other appended data.
  • Page 69 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes Reading Parameters OUBLE IMEOUT ON PAGE EADING CTIVE ON PAGE EEPER NDICATORS ON PAGE TAND LLUMINATION ONTROL ON PAGE OWER LERT ON PAGE LASH ON PAGE...
  • Page 70 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.7.1 Double Read Double Read Timeout prevents a double read of the same label by setting the minimum time allowed between reads of labels of the same symbology and data. If the unit reads a label and Timeout sees the same label again within the specified timeout, the second read is ignored.
  • Page 71 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CSN- Double Read Timeout = 0.8 Second $CSN- Double Read Timeout = 0.9 Second $CSN- Double Read Timeout = 1 Second www.balluff.com...
  • Page 72 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.7.2 LED and Beeper Indicators Power On Alert Disables or enables the indication (from the Beeper) that the reader is receiving power. $CBP- Power On Alert = Disable (No Audible Indication)
  • Page 73 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Good Read Specifies whether the good read beep has a mono or bitonal beep sound. Beep Type $CBP- DEFAULT Good Read Beep Type = Mono $CBP- Good Read Beep Type = Bitonal...
  • Page 74 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Good Read Beep Length $CBPLE06(CR Good Read Beep Length = 60 msec $CBPLE08(CR DEFAULT Good Read Beep Length = 80 msec $CBPLE0A(CR Good Read Beep Length = 100 msec...
  • Page 75 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Good Read Selects the beeper volume (loudness) upon a good read beep. There are three selectable volume Beep Volume levels. $CBP- Good Read Beep Volume = Beeper Off $CBP-...
  • Page 76 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Good Read LED This feature specifies the amount of time that the Good Read LED remains on following a good Duration read. The good read LED on time can be set within a range of 100 milliseconds to 25,500 milli- seconds (0.1 to 25.5 seconds) in 100ms increments.
  • Page 77 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.7.3 Reading Features Scan Mode Selects the reader’s scan operating mode. See page 261 in “References” for descriptions. $CSN- DEFAULT Scan Mode = Trigger Single $CSN- Scan Mode = Trigger Hold Multiple...
  • Page 78 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Stand Mode This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue indi- Indication cator will blink when Stand Mode reading is active.
  • Page 79 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Stand Mode Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high. Sensitivity $CSMSE00(C Stand Mode Sensitivity = Low $CSMSE01(C DEFAULT Stand Mode Sensitivity = Medium...
  • Page 80 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Reading Active This setting specifies the amount of time that the reader stays in scan ON state once the state is Time entered. The range for this setting is from 1 to 255 seconds in 1-second increments. See page 263 in “References”...
  • Page 81 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Flash On Time This feature specifies the ON time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. See page 265 “References”...
  • Page 82 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Aiming Pointer Enables/disables the aiming pointer for all symbologies. $CTAAP00(CR) Aiming Pointer = Disable $CTAAP01(CR) DEFAULT Aiming Pointer = Enable Aiming Duration Specifies the frame of time the aiming pointer remains on after decoding a label, when in trigger Timer single mode.The range for this setting is from 1 to 255 seconds in 1-second increments.
  • Page 83 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Green Spot Specifies the duration of the good read pointer beam after a good read. Duration $CLSSP00(CR Green Spot Duration = Disable (Green Spot is Off) $CLSSP01(CR DEFAULT Green Spot Duration = Short (300 msec)
  • Page 84 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Decode Enable/Disable the ability to decode a negative label for all symbologies. When this feature is Negative Labels enabled, you will be unable to read normally-printed labels or programming labels in this manual.
  • Page 85 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.7.4 Multiple Label In standard (default) mode, when the reader’s aiming system is activated (by a trigger pull, motion or other method depending on the mode), it then acquires and processes each code in the area Reading in front of it (the Volume).
  • Page 86 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Multiple Labels Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled. Ordering by Code Length $CSN- DEFAULT Multiple Labels Ordering = Disable $CSN- $CSN-...
  • Page 87 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes 1D Symbologies The reader supports the following 1D symbologies (barcode types). See "2D Symbologies" start- ing on page 175 for 2D barcodes. Symbology-dependent options are included in each chapter.

  • Page 88: Disable All Symbologies

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Disable All Use this feature to disable all symbologies. Symbologies 1 Scan the ENTER/EXIT PROGRAMMING Mode barcode. 2 Scan the Disable All Symbologies barcode. 3 Complete the programming sequence by reading the ENTER/EXIT PROGRAMMING barcode.

  • Page 89: Code Ean/Upc

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.1 Code EAN/UPC Coupon Control This feature is used to control the reader’s method of processing coupon labels. CPLC00(CR Coupon Control = Allow all coupon barcodes to be decoded...
  • Page 90 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.2 UPC-A The following options apply to the UPC-A symbology. UPC-A Enable/ When disabled, the reader will not read UPC-A barcodes. Disable ABEN00(CR UPC-A = Disable ABEN01(CR DEFAULT UPC-A = Enable UPC-A Check Enable this option to transmit the check character along with UPC-A barcode data.
  • Page 91 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Expand UPC-A Expands UPC-A data to the EAN-13 data format. Selecting this feature also changes the symbol- to EAN-13 ogy ID to match those required for EAN-13. AB3B00(CR DEFAULT UPC-A to EAN-13 = Don’t Expand...

  • Page 92: Upc-E

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.3 UPC-E The following options apply to the UPC-E symbology. UPC-E Enable/ When disabled, the reader will not read UPC-E barcodes. Disable EBEN00(CR UPC-E = Disable EBEN01(CR DEFAULT UPC-E = Enable UPC-E Check Enable this option to transmit the check character along with UPC-E barcode data.
  • Page 93 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Expand UPC-E Expands UPC-E data to the EAN-13 data format. Selecting this feature also changes the symbol- to EAN-13 ogy ID to match those required for EAN-13. EB3B00(CR DEFAULT UPC-E to EAN-13 = Don’t Expand...

  • Page 94: Gtin Formatting

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.4 GTIN This feature enables/disables the ability to convert UPC-E, UPC-A, EAN 8, and EAN 13 labels into the GTIN 14-character format. Formatting If add-on information is present on the base label prior to the conversion taking place, the add-on information will be appended to the converted GTIN label.

  • Page 95: Ean 13 (Jan 13)

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.5 EAN 13 (Jan 13) The following options apply to the EAN 13 (Jan 13) symbology. EAN 13 Enable/ When disabled, the reader will not read EAN 13/JAN 13 barcodes.
  • Page 96 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes EAN-13 Flag 1 Enables/disables transmission of an EAN/JAN13 Flag1 character. The Flag 1 character is the first Character character of the label. 3BF100(CR) EAN-13 Flag 1 Char= Don’t transmit...

  • Page 97: Issn

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.6 ISSN The following options apply to the ISSN symbology. ISSN Enable/ Enables/disables conversion of EAN/JAN13 Bookland labels starting with 977 to ISSN labels. Disable 3BIN00(CR) DEFAULT ISSN = Disable...

  • Page 98: Ean 8 (Jan 8)

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.7 EAN 8 (Jan 8) The following options apply to the EAN 8 (Jan 8) symbology. EAN 8 Enable/ When disabled, the reader will not read EAN 8/JAN 8 barcodes.
  • Page 99 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.8 EAN 8 2D This feature enables/disables a requirement that a 2D label component be decoded when a base label for this symbology is decoded. Component 8B2D00(CR DEFAULT EAN 8 2D Component =...

  • Page 100: Upc/Ean Global Settings

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.9 UPC/EAN This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8 symbologies, and affects all of these unless otherwise marked for each feature description. Global Settings UPC/EAN Price This feature enables/disables calculation and verification of price/weight check digits.

  • Page 101: Add-Ons

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.10 Add-Ons Contact Customer Support for advanced programming of optional and conditional add-ons. Optional Add- The reader can be enabled to optionally read the following add-ons (supplementals): If a UPC/EAN base label and an add-on are both decoded, the reader will transmit the base label and add-on.
  • Page 102 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Optional Add- This option sets the time the reader will look for an add-on when an add-on fragment has been On Timer seen and optional add-ons are enabled. (Also see "Optional GS1-128 Add-On Timer"...
  • Page 103 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CAD- Optional Add-on Timer = 120ms $CAD- Optional Add-on Timer = 140ms $CAD- Optional Add-on Timer = 160ms $CAD- Optional Add-on Timer = 180ms $CAD- Optional Add-on Timer = 200ms...
  • Page 104 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CAD- Optional Add-on Timer = 280ms $CAD- Optional Add-on Timer = 300ms Optional GS1- This option sets the timer expiration value to read the added part after reading the linear EAN/ 128 Add-On UPC part.
  • Page 105 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ADUT05(CR Optional GS1-128 Add-On Timer = 50ms ADUT06(CR Optional GS1-128 Add-On Timer = 60ms ADUT07(CR Optional GS1-128 Add-On Timer = 70ms CADUT0A(C Optional GS1-128 Add-On Timer = 100ms CADUT0C(C...
  • Page 106 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ADUT12(CR Optional GS1-128 Add-On Timer = 180ms ADUT14(CR Optional GS1-128 Add-On Timer = 200ms ADUT16(CR Optional GS1-128 Add-On Timer = 220ms ADUT18(CR Optional GS1-128 Add-On Timer = 240ms CADUT1A(C...

  • Page 107: Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.11 Code 39 The following options apply to the Code 39 symbology. Code 39 Enable/Disable C3EN00(CR Code 39 = Disable C3EN01(CR DEFAULT Code 39 = Enable Code 39 Check...
  • Page 108 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 39 Check Enable this option to transmit the check character along with Code 39 barcode data. Character Transmission C3CT00(CR Code 39 Check Character Transmission = Don’t Send C3CT01(CR...
  • Page 109 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 39 Quiet This feature specifies the number of quiet zones for Code 39 labels. Quiet zones are blank areas Zones at the ends of a barcode, typically 10 times the width of the narrowest bar or space in the label.
  • Page 110 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 39 Set This feature specifies one of the barcode lengths for Code 39 Length Control. Length 1 is the Length 1 minimum label length if in Variable Length...
  • Page 111 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 39 Set This feature specifies one of the barcode lengths for Code 39 Length Control. Length 2 is the Length 2 maximum label length if in Variable Length...

  • Page 112: Trioptic Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.12 Trioptic Code The following options apply to the Trioptic symbology. Trioptic Code Enable/Disable CTEN00(CR DEFAULT Trioptic Code = Disable CTEN01(CR Trioptic Code = Enable...

  • Page 113: Code 32 (Ital Pharmaceutical Code)

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.13 Code 32 (Ital The following options apply to the Code 32 (Italian Pharmaceutical Code) symbology. Pharmaceutical Code) Code 32 When disabled, the reader will not read Code 32 barcodes.
  • Page 114 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.14 Code 32 Start/ This option enables/disables transmission of Code 32 start and stop characters. Stop Character Transmission P3SS00(CR DEFAULT Code 32 Start/Stop Character Transmission = Don’t Transmit P3SS01(CR...
  • Page 115 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.15 Code 39 CIP The following options apply to the Code 39 CIP symbology. (French Pharmaceutical) Code 39 CIP Enables/Disables ability of the reader to decode Code 39 CIP labels.

  • Page 116: Code 39 Danish Ppt

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.16 Code 39 Danish The following options apply to the Code 39 Danish PPT symbology. Code 39 Danish Enables/Disables AIM ID for Code 39 Danish PPT Codes. PPT Enable/...

  • Page 117: Code 39 Laposte

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.17 Code 39 The following options apply to the Code 39 LaPoste symbology. LaPoste Code 39 Enables/disables the ability of the reader to decode Code39 La Poste labels. LaPoste Enable/...

  • Page 118: Code 39 Pzn

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.18 Code 39 PZN The following options apply to the Code 39 PZN symbology. Code 39 PZN Enables/disables the ability of the reader to decode Code39 PZN labels. Enable/Disable...

  • Page 119: Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.19 Code 128 The following options apply to the Code 128 symbology. Code 128 When disabled, the reader will not read Code 128 barcodes. Enable/Disable C8EN00(CR Code 128 = Disable...
  • Page 120 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 128 Enables/disables transmission of Code128 function characters 1, 2, 3, and 4. Function Character Transmission C8TF00(CR) DEFAULT Code 128 Function Character Transmission = Don’t Send C8TF01(CR) Code 128 Function Character Transmission =...
  • Page 121 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 128 This feature specifies either variable length decoding or fixed length decoding for the Code 128 Length Control symbology. See page 249 for more information. C8LC00(CR DEFAULT Code 128 Length Control = Variable Length...
  • Page 122 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 128 Set This feature specifies one of the barcode lengths for Code 128 Length Control. Length 2 is the Length 2 maximum label length if in Variable Length...

  • Page 123: Gs1-128

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.20 GS1-128 The following options apply to the GS1-128 symbology. (Also known as USS-128, GS1-128, GTIN-128, UCC-128, EAN-128.) GS1-128 Enable This option enables/disables the ability of the reader to translate GS1-128 labels to the GS1-128 data format.

  • Page 124: Code Isbt

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.21 Code ISBT 128 The following options apply to the ISBT 128 symbology. ISBT 128 Use this option to enable/disable ISBT128 concatenation of 2 labels. Concatenation CI8CE00(CR) DEFAULT ISBN 128 Concatenation = Disable...
  • Page 125 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ISBT 128 Specifies the concatenation mode between Static and Dynamic. Concatenation Mode This option is only valid when ISBT 128 Concatenation is enabled (see "ISBT 128 Concatenation" on page 124).
  • Page 126 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ISBT 128 Specifies the timeout used by the ISBT 128 Dynamic Concatenation Mode. Dynamic Concatenation Timeout CI8DT05(CR) ISBT 128 Dynamic Concatenation Timeout = 50 msec $CI8DT0A(CR) ISBT 128 Dynamic Concatenation Timeout =...

  • Page 127: Interleaved 2 Of 5 (I 2 Of 5)

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.22 Interleaved 2 of The following options apply to the I 2 of 5 symbology. 5 (I 2 of 5) I 2 of 5 Enable/ When disabled, the reader will not read I 2 of 5 barcodes.
  • Page 128 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes I 2 of 5 Check This option enables/disables calculation and verification of an optional I 2 of 5 check character. Character Calculation I2CC00(CR) DEFAULT I 2 of 5 Check Character Calculation = Disable...
  • Page 129 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes I 2 of 5 Check Enable this option to transmit the check character along with I 2 of 5 barcode data. Character Transmission CI2CT00(CR) I 2 of 5 Check Character Transmission = Don’t Send...
  • Page 130 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes I 2 of 5 Set This feature specifies one of the barcode lengths for I 2 of 5 Length Control. Length 1 is the mini- Length 1 mum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. The length includes the barcode’s check and data characters.
  • Page 131 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes I 2 of 5 Set This feature specifies one of the barcode lengths for I 2 of 5 Length Control. Length 2 is the max- Length 2 imum label length if in...

  • Page 132: Interleaved 2 Of 5 Cip Hr

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.23 Interleaved 2 of The following options apply to the Interleaved 2 of 5 CIP HR symbology. 5 CIP HR Interleaved 2 of Enables/Disables ability of reader to decode Interleaved 2 of 5 CIP HR labels.

  • Page 133: Follett 2 Of

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.24 Follett 2 of 5 The following options apply to the Follett 2 of 5 symbology. Follett 2 of 5 Enables/Disables ability of reader to decode Plessey labels. Enable/Disable...

  • Page 134: Standard 2 Of

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.25 Standard 2 of 5 The following options apply to the Standard 2 of 5 symbology. Standard 2 of 5 When disabled, the reader will not read Standard 2 of 5 barcodes.
  • Page 135 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Standard 2 of 5 This feature specifies either variable length decoding or fixed length decoding for the Standard 2 Length Control of 5 symbology. Variable Length: For variable length decoding, a minimum and maximum length may be set.
  • Page 136 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CS2L1 Select Standard 2 of 5 Length 1 Setting Make a mistake? Scan the CANCEL barcode to abort and not save the entry string. You can then start again at the beginning.
  • Page 137 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CS2L2 Select Standard 2 of 5 Length 2 Setting Make a mistake? Scan the CANCEL barcode to abort and not save the entry string. You can then start again at the beginning.

  • Page 138: Industrial 2 Of

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.26 Industrial 2 of 5 The following options apply to the Industrial 2 of 5 symbology. Industrial 2 of 5 Enables/Disables ability of reader to decode Industrial 2 of 5 labels.
  • Page 139 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Industrial 2 of 5 This feature specifies either variable length decoding or fixed length decoding for the Industrial 2 Length Control of 5 symbology. Variable Length: For variable length decoding, a minimum and maximum length may be set.
  • Page 140 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Industrial 2 of 5 This feature specifies one of the barcode lengths for Industrial 2 of 5 Length Control. Length 1 is Set Length 1 the minimum label length if in...
  • Page 141 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Industrial 2 of 5 This feature specifies one of the barcode lengths for Industrial 2 of 5 Length Control. Length 2 is Set Length 2 the maximum label length if in...

  • Page 142: Code Iata

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.27 Code IATA The following options apply to the IATA symbology. IATA Enable/ Enables/Disables the ability of the reader to decode IATA labels. Disable CIAEN00(CR) DEFAULT IATA = Disable...

  • Page 143: Codabar

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.28 Codabar The following options apply to the Codabar symbology. Codabar When disabled, the reader will not read Codabar barcodes. Enable/Disable CCBEN00(C DEFAULT Codabar = Disable CCBEN01(C Codabar = Enable...
  • Page 144 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Codabar Check Enable this option to transmit the check character along with Codabar barcode data. Character Transmission CCBCT00(C Codabar Check Character Transmission = Don’t Send CCBCT01(C DEFAULT Codabar Check Character Transmission =...
  • Page 145 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Codabar Start/ This option specifies the format of transmitted Codabar start/stop characters. Stop Character $CCB- Codabar Check Character Set = ABCD/TN*E $CCB- Codabar Check Character Set = ABCD/ABCD $CCB-...
  • Page 146 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Codabar Quiet Specifies the number of quiet zones for Codabar labels. Quiet zones are blank areas at the ends Zones of a barcode and are typically 10 times the width of the narrowest bar or space in the label.
  • Page 147 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Codabar Set This feature specifies one of the barcode lengths for Codabar Length ControlCodabar Length Length 1 Control. Length 1 is the minimum label length if in Variable Length...
  • Page 148 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Codabar Set This feature specifies one of the barcode lengths for Codabar Length ControlCodabar Length Length 2 Control. Length 2 is the maximum label length if in Variable Length...

  • Page 149: Abc Codabar

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.29 ABC Codabar The following options apply to the ABC Codabar symbology. ABC Codabar Enables/Disables ability of reader to decode ABC Codabar labels. Enable/Disable CCBAB00(C DEFAULT ABC Codabar = Disable...
  • Page 150 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ABC Codabar Specifies the timeout in 10-millisecond ticks used by the ABC Codabar Dynamic Concatenation Dynamic Mode. Concatenation Timeout $CCB- ABC Codabar Dynamic Concatenation Time- out = 50 msec...
  • Page 151 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes ABC Codabar Forces labels starting or ending with D to be concatenated. Force Concatenation $CCB- DEFAULT ABC Codabar Force Concatenation = Disable $CCB- ABC Codabar Force Concatenation = Enable...

  • Page 152: Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.30 Code 11 The following options apply to the Code 11 symbology. Code 11 When disabled, the reader will not read Code 11 barcodes. Enable/Disable C1EN00(CR DEFAULT Code 11 = Disable...
  • Page 153 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 11 Check This feature enables/disables transmission of an optional Code 11 check character. Character Transmission C1CT00(CR Code 11 Check Character Transmission = Don’t Send C1CT01(CR DEFAULT Code 11 Check Character Transmission =...
  • Page 154 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 11 Set This feature specifies one of the barcode lengths for Code 11 Length Control. Length 1 is the Length 1 minimum label length if in Variable Length...
  • Page 155 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 11 Set This feature specifies one of the barcode lengths for Code 11 Length Control. Length 2 is the Length 2 maximum label length if in Variable Length...

  • Page 156: Gs1 Databar™ Omnidirectional

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.31 GS1 DataBar™ The following options apply to the GS1 DataBar™ Omnidirectional (formerly RSS-14) symbology. Omnidirectional GS1 DataBar™ When disabled, the reader will not read GS1 DataBar™ Omnidirectional barcodes.

  • Page 157: Code 39 Cip (French Pharmaceutical), Page 115 Gs1 Databar™ Expanded

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.32 GS1 DataBar™ The following options apply to the GS1 DataBar™ Expanded (formerly RSS Expanded) symbol- ogy. Expanded GS1 DataBar™ When disabled, the reader will not read GS1 DataBar™ Expanded barcodes.
  • Page 158 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes GS1 DataBar™ This feature enables/disables a requirement that a 2D label component be decoded when a base Expanded 2D label of this symbology is decoded. Component XB2D00(CR DEFAULT GS1 DataBar™ Expanded 2D Component =...
  • Page 159 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes GS1 DataBar™ This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded Length Control. Expanded Set Length 1 is the minimum label length if in Variable Length...
  • Page 160 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes GS1 DataBar™ This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded Length Control. Expanded Set Length 2 is the maximum label length if in Variable Length...

  • Page 161: Gs1 Databar™ Limited

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.33 GS1 DataBar™ The following options apply to the GS1 DataBar™ Limited (formerly RSS Limited) symbology. Limited GS1 DataBar™ When disabled, the reader will not read GS1 DataBar™ Limited barcodes.

  • Page 162: Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.34 Code 93 The following options apply to the Code 93 symbology. Code 93 Enables/Disables ability of reader to decode Code 93 labels. Enable/Disable C9EN00(CR DEFAULT Code 93 = Disable...
  • Page 163 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 93 Check Enables/disables transmission of an optional Code 93 check character. Character Transmission C9CT00(CR Code 93 Check Character Transmission = Disable C9CT01(CR DEFAULT Code 93 Check Character Transmission =...
  • Page 164 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 93 Set Specifies one of the barcode lengths for Code 93 Length Control. Length 1 is the minimum label Length 1 length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.
  • Page 165 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 93 Set This feature specifies one of the barcode lengths for Code 93 Length Control. Length 2 is the Length 2 maximum label length if in Variable Length...
  • Page 166 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Code 93 Quiet Enables/disables quiet zones for Code 93. Zones $CC9- Code 93 Quiet Zones = Quiet Zones on two sides $CC9- DEFAULT Code 93 Quiet Zones = Small Quiet Zones on two sides...

  • Page 167: Msi

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.35 MSI The following options apply to the MSI symbology. MSI Enable/ Enables/Disables ability of reader to decode MSI labels. Disable CMSEN00(C DEFAULT MSI = Disable CMSEN01(C MSI = Enable MSI Check Enables/Disables calculation and verification of an optional MSI check character.
  • Page 168 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes MSI Check Enables/disables transmission of an MSI check character. Character Transmission CMSCT00(C MSI Check Character Transmission = Disable CMSCT01(C DEFAULT MSI Check Character Transmission = Enable MSI Length This feature specifies either variable length decoding or fixed length decoding for the MSI symbol- Control ogy.
  • Page 169 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes MSI Set This feature specifies one of the barcode lengths for MSI Length Control. Length 1 is the mini- Length 1 mum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.
  • Page 170 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes MSI Set This feature specifies one of the barcode lengths for MSI Length Control. Length 2 is the maxi- Length 2 mum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.

  • Page 171: Plessey

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.8.36 Plessey The following options apply to the Plessey symbology. Plessey Enable/ Enables/Disables ability of reader to decode Plessey labels. Disable PLEN00CR) DEFAULT Plessey = Disable PLEN01CR) Plessey = Enable Plessey Check Enables/Disables calculation and verification of an optional Plessey check character.
  • Page 172 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Plessey Check Enables/disables transmission of an MSI check character. Character Transmission PLCT00(CR Plessey Check Character Transmission = Disable PLCT01(CR DEFAULT Plessey Check Character Transmission = Enable Plessey Length This feature specifies either variable length decoding or fixed length decoding for the Plessey Control symbology.
  • Page 173 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Plessey Set This feature specifies one of the barcode lengths for Plessey Length Control. Length 1 is the min- Length 1 imum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.
  • Page 174 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Plessey Set This feature specifies one of the barcode lengths for Plessey Length Control. Length 2 is the max- Length 2 imum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.
  • Page 175 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes 2D Symbologies 2D Global Features 2D Maximum Decoding Time on page 176 2D Normal/Inverse Symbol Control on page 177 2D Structured Append on page 177 The reader supports the following 2D symbologies (barcode types). Symbology-dependent options for each symbology are included in this chapter.

  • Page 176: Maximum Decoding Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 2D Maximum This feature specifies the maximum amount of time the software will spend attempting to decode Decoding Time a 2D label. The selectable range is 10 milliseconds to 2.55 milliseconds.

  • Page 177: Structured Append

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 2D Structured Enables/disables ability of reader to append multiple 2D Codes labels in a structured format. The Append structured append property is globally applied to the following symbologies, if these are enabled:...

  • Page 178: Aztec Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.2 Aztec Code Aztec Code Enables/disables the ability of the reader to decode Aztec Code labels. Enable / Disable AZEN00(CR DEFAULT Aztec Code = Disable AZEN01(CR Aztec Code = Enable Aztec Code This feature specifies either variable length decoding or fixed length decoding for this symbology.
  • Page 179 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Aztec Code Set Specifies one of the barcode lengths for Aztec Code Length Control. Length 1 is the minimum Length 1 label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).

  • Page 180: China Sensible Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.3 China Sensible Code China Sensible Enables/disables the ability of the reader to decode China Sensible Code labels. Code Enable / Disable CCSEN00(C DEFAULT China Sensible Code = Disable...
  • Page 181 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes China Sensible Specifies one of the barcode lengths for China Sensible Code Length Control. Length 1 is the Code Set minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.

  • Page 182: Data Matrix

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.4 Data Matrix Data Matrix Enables/disables ability of reader to decode Data Matrix labels. Enable / Disable CDMEN00(C Data Matrix = Disable CDMEN01(C DEFAULT Data Matrix = Enable Data Matrix Specifies the options available when reading Data Matrix with different form factors.
  • Page 183 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Data Matrix This feature defines the tolerance of DPM decoding software to operate with poor quality labels. DPM Decoding Decoding Safety is used to configure a barcode symbology decoder to be very aggressive to very Safety conservative depending on a particular customer’s needs.
  • Page 184 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Data Matrix This feature specifies either variable length decoding or fixed length decoding for this symbology. Length Control Variable Length: For variable length decoding, a minimum and maximum length may be set.
  • Page 185 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Data Matrix Set This feature specifies one of the barcode lengths for Data Matrix Length Control. Length 2 is the Length 2 maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.

  • Page 186: Maxicode

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.5 Maxicode Maxicode Enables/disables ability of reader to decode Maxicode labels. Enable / Disable $CMX- DEFAULT Maxicode = Disable $CMX- Maxicode = Enable Maxicode Enables/disables the transmission of only the Primary Message when the Secondary Message is Primary not readable.
  • Page 187 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Maxicode This feature specifies either variable length decoding or fixed length decoding for this symbology. Length Control Variable Length: For variable length decoding, a minimum and maximum length may be set.
  • Page 188 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Maxicode Set This feature specifies one of the barcode lengths for Maxicode Length Control. Length 2 is the Length 2 maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.

  • Page 189: Pdf417

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.6 PDF417 PDF417 Enable Enables/disables the ability of the reader to decode PDF417 labels. / Disable P4EN00(CR PDF417 = Disable P4EN01(CR DEFAULT PDF417 = Enable PDF417 Length This feature specifies either variable length decoding or fixed length decoding for this symbology.
  • Page 190 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes PDF417 Set Specifies one of the barcode lengths for PDF417 Length Control. Length 1 is the minimum label Length 1 length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s data characters only.

  • Page 191: Micro Pdf417

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.7 Micro PDF417 Micro PDF417 Enables/disables the ability of the reader to decode Micro PDF417 labels. Enable / Disable MIEN00(CR) DEFAULT Micro PDF417 = Disable MIEN01(CR) Micro PDF417 = Enable Micro PDF417 Specifies which AIM ID to use for MicroPDF labels when doing Code 128 or GS1-128 emulation.
  • Page 192 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Micro PDF417 This feature specifies either variable length decoding or fixed length decoding for this symbology. Length Control Variable Length: For variable length decoding, a minimum and maximum length may be set.
  • Page 193 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Micro PDF417 This feature specifies one of the barcode lengths for Micro PDF417 Length Control. Length 2 is Set Length 2 the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length includes the barcode’s data characters only.

  • Page 194: Qr Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.8 QR Code QR Code Enables/disables the ability of the reader to decode QR Code labels. Enable / Disable CQREN00(C QR Code = Disable CQREN01(C DEFAULT QR Code = Enable QR Code This feature specifies either variable length decoding or fixed length decoding for this symbology.
  • Page 195 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes QR Code Set Specifies one of the barcode lengths for QR Code Length Control. Length 1 is the minimum label Length 1 length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Characters can be set from 0001 to 7,089 characters in increments of 0001 (pad with zeroes).

  • Page 196: Micro Qr Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.9 Micro QR Code Micro QR Code Enables/disables the ability of the reader to decode Micro QR Code labels. Enable/Disable MQEN00 DEFAULT Micro QR Code = Disable MQEN01 Micro QR Code = Enable Micro QR Code This feature specifies either variable length decoding or fixed length decoding for this symbology.
  • Page 197 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Micro QR Code Specifies one of the barcode lengths for Micro QR Code Length Control. Length 1 is the minimum Set Length 1 label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.

  • Page 198: Ucc Composite

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.10 UCC Composite UCC Composite Enables/disables the ability of the reader to decode the stacked part of a UCC Composite label. Enable / Disable This feature is not effective when Global AIM IDs are enabled (see "Global AIM...
  • Page 199 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes UCC Optional Specifies the amount of time the system will wait for the stacked part of a UCC Composite label Composite before transmitting the linear label without an add-on.

  • Page 200: Postal Code Selection

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.9.11 Postal Code Enables/disables the ability of the reader to decode labels of a specific postal symbology. Selection CPOEN00(C DEFAULT Postal Code Selection = Disable All Postal Codes CPOEN01(C...
  • Page 201 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes CPOEN06(C Postal Code Selection = Enable Japan Post CPOEN07(C Postal Code Selection = Enable IMB CPOEN08(C Postal Code Selection = Enable Sweden Post CPOEN09(C Postal Code Selection = Enable Portugal Post 3.9.12 Postnet BB...
  • Page 202 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes...
  • Page 203 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes 3.10 Motion Features OTION IMING ONTROL ON PAGE OTION ENSITIVITY ON PAGE OTIONLESS IMEOUT ON PAGE Use this chapter to configure motion settings for the handheld.
  • Page 204 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.10.2 Motion Defines discrete set of levels for reader motion sensitivity when in handheld use. Sensitivity $CMO- Motion Sensitivity = Low $CMO- DEFAULT Motion Sensitivity = Medium $CMO- Motion Sensitivity = High...
  • Page 205 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.10.3 Motionless Specifies the waiting time in 100 millisecond ticks to assume that the reader is in a motionless condition. The selectable range is 500 msec to 25.5 Seconds. When no motion event is detected...
  • Page 206 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes...
  • Page 207 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Configuration Using Barcodes 3.11 Wireless This section provides options and programming related to the reader’s wireless communication Features features. Reference Appendix C: Standard Defaultsfor a listing of standard factory settings.
  • Page 208 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes BVS HS-PB Only Features starting on page 225 LUETOOTH ECURITY EATURES •Bluetooth Security Mode on page 226 •Bluetooth PIN Code on page 226 •Select PIN Code Length on page 226 •Set PIN Code on page 227...

  • Page 209: Wireless Beeper Features

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.1 Wireless Beeper Several options are available to configure beeper behavior for RF operation. Features Good Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs when a Transmission Label is correctly transmitted to the base.

  • Page 210: Beep Duration

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Beep Duration This feature controls the duration of radio-specific beep indications. $CBTBD06(CR Beep Duration = 60 msec $CBTBD08(CR DEFAULT Beep Duration = 80 msec $CBTBD0A(C Beep Duration = 100 msec...

  • Page 211: Beep Volume

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Beep Volume Selects the beeper volume (loudness) of radio-specific beep indications. There are three select- able volume levels. $CBT- Beep Volume = Low $CBT- Beep Volume = Medium $CBT-...

  • Page 212: Docking Beep

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Docking Beep Enables/disables a beep indication when the handheld is placed in the Base Station. $CBTCB00(CR Docking Beep = Disable $CBTCB01(C DEFAULT Docking Beep = Enable Leash Alarm This setting specifies the number of seconds to sound the Leash Mode beeps (three per second) when the handheld goes out of range.
  • Page 213 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes $CBTLB04(CR Leash Alarm = 4 Seconds $CBTLB05(CR Leash Alarm = 5 Seconds $CBTLB0A(CR Leash Alarm = 10 Seconds $CBTLB19(CR Leash Alarm = 25 Seconds $CBTLB1E(CR Leash Alarm = 30 Seconds...

  • Page 214: Configuration Updates Starting

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.2 Configuration page 270 in “References” for detailed information and examples of these features. Updates Automatic When this feature is enabled, a reader and its linked Base Station can automatically ensure they Configuration stay in sync with regard to application hardware and/or configuration.

  • Page 215: Batch Features

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.3 Batch Features Batch Mode This option specifies whether to store labels in the handheld while disconnected from the base. Options are as follows: - Disabled — The handheld will not store/batch labels.

  • Page 216: Erase Batch Memory

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Erase Batch When the reader is configured in Manual Batch Mode, use the following barcode to erase any Memory labels stored in batch memory. Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with this barcode.

  • Page 217: Direct Radio Autolink Starting

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.4 Direct Radio This feature enables/disables the ability to link a wireless handheld to a base station without read- ing the Unlink label first. Autolink $CBT- DEFAULT Direct Radio Link = Unlink Label Required...

  • Page 218: Rf Address Stamping

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.5 RF Address These features allow configuration of source radio data inclusion. Stamping Source Radio Enables/disables the ability of source radio address information to be transmitted to the host and, Address if so, at what position with respect to the label data.
  • Page 219 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes www.balluff.com...

  • Page 220: Real Time Clock (Rtc) Configuration

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.11.6 Real Time Clock (RTC) Configuration Current Date Sets the date of the internal Real Time Clock (RTC) To configure this feature, scan the ENTER/ EXIT PROGRAMMING MODE barcode...

  • Page 221: Date Tx Format

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Date Tx Format Sets the format of the date. $CDTXF00\r DEFAULT YYYY-MM-DD (ISO 8601) $CDTXF01\r YYYYMMDD (No ISO) $CDTXF02\r MMDDYYYY $CDTXF03\r DDMMYYYY Time Tx Format Sets the format of the time.

  • Page 222: Date-Time Separator

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Date-Time Sets the character used to separate Date and Time from the next field in message. Separator $CRFTD0000\r DEFAULT Disable Date-Time Separator To configure this feature, scan the ENTER/...

  • Page 223: Date-Time Transmission Order

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Date-Time Allows the selection of the order of date and time transmission. Transmission Order $CRFTS00\r DEFAULT Disabled $CRFTS01\r ISO 8601: Date'T'Time $CRFTS02\r DateTime $CRFTS03\r TimeDate $CRFTS04\r Date $CRFTS05\r Time...

  • Page 224: Power Off

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Power Off See “Power Off” on page 29 for information about this feature. Powerdown The Powerdown Timeout feature sets the time for automatically switching the unit off when the Timeout imager has been idle.

  • Page 225: Bluetooth Security Features

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.12 BVS HS-PB The features in this section are valid only for BVS HS-PB models with bluetooth. Also reference ONLY Features the Setup section for instructions on "Linking the Reader,"...

  • Page 226: Bluetooth Security Mode

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Bluetooth This feature enables/disables authentication and encryption of the Bluetooth link. Use the feature Security Mode "Bluetooth PIN Code" on page 226 to specify the length and digits in the PIN code used to authenticate the Bluetooth Link.

  • Page 227: Set Pin Code

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Set PIN Code Determine the desired characters for the PIN code, then convert to hexadecimal using the ASCII Chart on page 313 on the inside back cover of this manual.

  • Page 228: Other Bluetooth Features

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes 3.12.2 Other Bluetooth Features Reconnect This feature specifies the interval time between reconnection attempts. Attempt Interval $CBTRI01(CR) DEFAULT 1 minute $CBTRI02(CR) 5 minutes $CBTRI03(CR) 30 minutes $CBTRI00(CR) Indefinitely...

  • Page 229: Bluetooth Hid Variable Pin Code

    BVS HS-PB. Scan the barcode "Variable PIN Code" below, then use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff Reader." Use a text editor to see incoming data on the port designated by the computer's Blue- tooth manager.

  • Page 230: Bluetooth Hid Alt Mode

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Bluetooth HID Enable/Disable the ability to correctly transmit a label to the host regardless of the Bluetooth HID Alt Mode Country Mode selected, when Bluetooth HID Profile is configured.

  • Page 231: Bluetooth Max Client

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Bluetooth Max Set the number of Readers that can connect to the Base in a Piconet network. Client $CBTMS01(C Bluetooth Max Client = 1 $CBTMS02(C DEFAULT Bluetooth Max Client = 2...

  • Page 232: Bluetooth Friendly Name

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Bluetooth You can set a meaningful name for BVS HS-PB that will appear in the application during device Friendly Name discovery. To set a new Bluetooth Friendly Name, scan the barcode below and follow the instructions.

  • Page 233: Power Class

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Power Class $CBTPP00(CR DEFAULT Power Class 1 $CBTPP01( Power Class 2 HID Country When the Reader is connected with a Bluetooth Adapter in HID mode, you may want to set the Mode country for which your PC is localized.
  • Page 234 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Country Mode = France Country Mode = French Canadian Country Mode = Germany Country Mode = Hungary Country Mode = Italy Country Mode = Japanese 106-key Country Mode = Lithuanian...
  • Page 235 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes Country Mode = Portugal Country Mode = Romania Country Mode = Spain Country Mode = Sweden Country Mode = Slovakia Country Mode = Switzerland www.balluff.com...
  • Page 236 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Configuration Using Barcodes...
  • Page 237 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References References This section contains explanations and examples of selected barcode features. See Configuration Using Barcodes, starting on page 31 for the actual barcode labels used to configure the reader. RS-232 P...

  • Page 238: Only

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References RS-232 Parameters 4.1.1 RS-232 Only Baud Rate Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate to match the baud rate setting of the host device. With an improper baud rate setting, data may not reach the host correctly.

  • Page 239: Rs-232/Usb Com Parameters

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.1.2 RS-232/USB Parameters This parameter specifies the intercharacter delay between the end of one character and the Intercharacter Delay beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments.
  • Page 240 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References ACK NAK This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol. When Options configured, the reader and/or host sends an “ACK” when it receives data properly, and sends “NAK”...
  • Page 241 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References NAK Character This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII characters or any hex value from 0 to 0xFF can be selected.
  • Page 242 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References ACK NAK This option specifies the amount of time the reader waits for an ACK character from the host fol- Timeout Value lowing label transmission. The selectable timeout range is 200 milliseconds to 15,000ms (15 sec- onds) in 200ms increments.
  • Page 243 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References ACK NAK Retry This feature specifies the number of times the reader retries a label transmission due to a retry Count condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and a selection of 255 specifies unlimited retries.
  • Page 244 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Disable Specifies the value of the RS-232 host command used to disable the reader. Character ASCII characters or any hex value from 0 to 0xFF can be selected. Setting to previously defined characters such as XON, XOFF, or host com- mands conflicts with normal operation of these characters.
  • Page 245 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Enable Specifies the value of the RS-232 host command used to enable the reader. Character ASCII characters or any hex value from 0 to 0xFF can be selected. Setting to previously defined characters such as XON, XOFF, or host com- mands conflicts with normal operation of these characters.

  • Page 246: Wedge Quiet Interval

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Keyboard Interface 4.2.1 Wedge Quiet Specifies the amount of time the reader looks for keyboard activity before it breaks the keyboard connection in order to transmit data to host. The range is from 0 to 990ms in 10ms increments.

  • Page 247: Intercharacter Delay

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References This parameter specifies the intercharacter delay between the end of one character and the 4.2.2 Intercharacter beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms Delay increments.

  • Page 248: Intercode Delay

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.2.3 Intercode Delay Specifies the delay between labels transmitted to the host for this interface. The selectable range for this feature is from 0 to 99 seconds. Follow these instructions to set this feature: 1 Determine the desired setting.

  • Page 249: Datamatrix Dpm Decoding Safety

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Symbologies 4.3.1 Datamatrix Decoding Safety is used to configure a decoder to be very aggressive to very conservative, depending on a particular customer’s needs. DPM Decoding Safety - Level 1 results in a very aggressive decoder.
  • Page 250 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Set Length 2 This feature allows you to set one of the barcode lengths for the specified symbology. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.
  • Page 251 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Data Editing When a barcode is readed, additional information can be sent to the host computer along with the barcode data. This combination of barcode data and supplementary user-defined data is called a “message string.”...

  • Page 252: Global Prefix/Suffix

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.4.1 Global Prefix/ Up to 20 ASCII characters may be added as a prefix (in a position before the barcode data) and/ or as a suffix (in a position following the barcode data) as indicated in...
  • Page 253 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References SYMBOLOGY CHAR SYMBOLOGY CHAR UPC/EAN Code 128/GS1-128 Code 39 and DataBar Omnidirectional, Code 32 DataBar Expanded Codabar Standard 2 of 5 Interleaved 2 of 5 ISBN Code 93 Code 11 UPC-A and UPC-E labels are converted to EAN 13 when adding AIM IDs.

  • Page 254: Label Id

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.4.3 Label ID A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01- 0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following the transmitted barcode data depending upon how this option is enabled.
  • Page 255 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References USA Label ID set EU Label ID set Symbology Default Default Default Default Character ASCII Character ASCII DATA MATRIX 446D00 770000 EAN128 000000 6B0000 EAN128 COMPOSITE 000000 244500 EAN13 460000 420000...
  • Page 256 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References USA Label ID set EU Label ID set Symbology Default Default Default Default Character ASCII Character ASCII POSTAL KIX 245500 245500 POSTAL PLANET 245700 245700 POSTAL PORTUGAL 245000 245000 POSTAL POSTNET BB...
  • Page 257 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Label ID: Set To configure a Label ID individually for a single symbology: Individually Per 1 Go to page 63 and scan the ENTER/EXIT barcode. Symbology 2 Select Label ID position as either BEFORE (Enable as Prefix) or AFTER (Enable as suffix) by reading the appropriate barcode in the section "Label ID Control"...
  • Page 258 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Label ID Examples STEP ACTION EXAMPLES Scan the ENTER/EXIT (Reader enters Programming Mode) barcode Determine placement of the Label ID characters BEFORE or AFTER with regard to Enable as Enable as...

  • Page 259: Character Conversion

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.4.4 Character Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs represented in hexadecimal ASCII values. The first character in the pair is the character that will Conversion be converted.

  • Page 260: Good Read Led Duration

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Reading Parameters 4.5.1 Good Read LED This feature specifies the amount of time that the Good Read LED remains on following a good read. The good read LED on time can be set within a range of 10 milliseconds to 2,550 millisec- Duration onds (0.001 to 2.55 seconds) in 100ms increments.

  • Page 261: Scan Mode

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Reading Features 4.6.1 Scan Mode This mode is associated with typical handheld reader operation. Selects the scan operating mode for the reader. The following selections are valid for all models: Trigger Single: When the trigger is pulled, reading is activated until one of the following occurs:...

  • Page 262: Stand Mode Off Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.2 Stand Mode Off This feature specifies the amount of time reader illumination stays off after pulling the trigger when in Stand Mode. The configurable range is 01 to 32 by 01 in increments of 500ms (500ms to 16 Time seconds).

  • Page 263: Reading Active Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.3 Reading Active This setting specifies the amount of time that the reader stays in scan ON state once the state is entered. The range for this setting is from 1 to 255 seconds in 1-second increments.

  • Page 264: Aiming Duration Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.4 Aiming Duration Specifies the frame of time the aiming pointer remains on after decoding a label, when in trigger single mode. The range for this setting is from 1 to 255 seconds in 1-second increments.

  • Page 265: Flash On Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.5 Flash On Time This feature specifies the ON time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments.

  • Page 266: Flash Off Time

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.6 Flash Off Time This feature specifies the OFF time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments.

  • Page 267: Multiple Labels Ordering By Code Symbology

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References 4.6.7 Multiple Labels This feature Specifies the transmission ordering by symbology type, when Multiple Labels per Frame is enabled.Up to six symbologies can be selected. Zeroes must be added to pad the string Ordering by to 12 characters if not using all six symbologies.
  • Page 268 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Symbology Hex Values Symbology ID Symbology ID Value Value Don't care GTIN5 UPC-A GTIN8 UPC-E S2OF5 EAN8 PDF417 EAN13 CODE11 UPC2 IATA UPC5 MICRO_PDF C128_ADDON GS1 DataBar_LIM_ID EAN128 GS1 DataBar_LIM_COMP C128_PROGRAMMING_LABEL...
  • Page 269 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Symbology ID Symbology ID Value Value EAN138 ABC_CODABAR ISBN_ID I2OF5_CIP TWO_LABEL_PAIR C2OF5 I2OF5 IND2OF5 CODABAR AZTEC CODE39 UPC-E_COMP PHARMAC39 UPC-A_COMP MSI_PLESSEY EAN8_COMP CODE93 EAN13_COMP RSS_EXP_ID EAN128_COMP DATA MATRIX_PROGRAMMING_LA- RSS_14_ID GTIN LABEL_ID_MAX...

  • Page 270: Wireless Features Starting

    Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Motionless Timeout Setting STEP ACTION EXAMPLES Examples 9,900ms Desired Setting 500ms 1 sec. 10 sec (9.9 sec.) Divide by 100 (and pad with leading zeroes to yield two digits) Scan ENTER/EXIT PROGRAMMING MODE...
  • Page 271 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Source Radio Address STEP ACTION EXAMPLES Delimiter Character No delimiter Desired Setting , (comma) - (dash) / (slash) Setting character Examples Scan ENTER/EXIT PROGRAMMING MODE Scan SET SOURCE RADIO ADDRESS DELIMiTER CHARACTER...
  • Page 272 Balluff BVS HS-P Family Industrial Handheld Barcode Readers References Bluetooth Pin Code Setting STEP ACTION EXAMPLES Examples Desired Setting D254 STOR12345678135M Convert the 53 54 4F 52 31 32 33 34 35 36 37 38 31 33 characters to 44 32 35 34...
  • Page 273 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Appendix A: Technical Specifications The tables that follow contain Physical and Performance Characteristics, User Environment and Regulatory information. Table Standard Cable Pinouts provides Standard Cable Pinouts. Technical Specifications...
  • Page 274 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Performance Characteristics Light Source Roll (Tilt) Tolerance ± 180° Pitch Tolerance ± 40° Skew (Yaw) Tolerance ± 40° Print Contrast 15% minimum reflectance Minimum 1D 2.5 mil Resolution...
  • Page 275 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Decode Capability Item Description GS1 Databar linear codes, UPC/EAN (A,E,13,8), UPC/EAN with P2/ P5 Addons, UPC/EAN Coupons, ISBN, Code128, EAN128, 1D Barcodes ISBT128, Code39, Code39 Full ASCII, Code39 CIP, Code 32, Cod-...
  • Page 276 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Item Description Regulatory BVS HS-PC models BVS HS-PB models UL 60950, CSA C22.2 UL 60950, CSA C22.2 Electrical Safety No. 60950, IEC 60950 No. 60950, IEC 60950 For Regulatory approvals please refer to the chapter...
  • Page 277 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Imager Labeling Sample labels are shown for illustrative purposes only. Please view the labels on your product for actual details, as they may vary from those depicted. Reader Regulatory Label Standard Cable The data below provides standard pinout information for the interface cable.
  • Page 278 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Standard Cable Pinouts RS-232 Keyboard Wedge RTS (out) CLKIN (KBD side) DATAIN (KBD side) CLKOUT (PC side) DATAOUT (PC side) CTS (in)
  • Page 279 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications LED and Beeper The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the Indications reader. An optional “Green Spot” also performs useful functions. The tables below list these indi- cations.
  • Page 280 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix A: Technical Specifications Error Codes Upon startup, if the reader sounds a long tone, this means the reader has not passed its auto- matic Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the sequence will be repeated.
  • Page 281 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes Appendix B: Sample Barcodes The sample barcodes in this appendix are typical representations for their symbology types. 1D Barcodes UPC-A EAN-13 978033029095 Code 39 Code 128 Code 128...
  • Page 282 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes Codabar 13579 Code 93 Code 11 123456789...
  • Page 283 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes GS1 DataBar™ (RSS) GS1 DataBar™ variants must be enabled to read the barcodes below (see "GS1 DataBar™ Omnidirectional" on page 156). NOTE GS1 DataBar™ Expanded Stacked 10293847560192837465019283746029 478450366523 GS1 DataBar™...
  • Page 284 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes GS1 DataBar™- GS1 DataBar™ Omnidirectional Truncated 55432198673467 GS1 DataBar™ Omnidirectional Stacked 90876523412674 GS1 DataBar™ Omnidirectional Stacked 78123465709811...
  • Page 285 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes 2D Barcodes Aztec Datamatrix China Sensible Code MaxiCode Test Message PDF 417 Micro PDF 417 ABCabc BV17453 QR Code Micro QR Code 123456 35900G9 UCC Composite www.balluff.com...
  • Page 286 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix B: Sample Barcodes...
  • Page 287 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Appendix C: Standard Defaults The most common configuration settings are listed in the “Default” column of the table below. Page references are also provided for feature descriptions and programming barcodes for each parameter.
  • Page 288 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Wedge Quiet Interval 100 ms Intercode Delay No Delay Caps Lock State Caps Lock OFF NumLock Key Numlock Unchanged USB Keyboard Speed...
  • Page 289 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Stand Mode Indication Disable Pick Mode Disable Stand Mode Sensitivity Medium Stand Mode Illumination Off Time 2 Seconds Reading Active Time 5 Seconds...
  • Page 290 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number UPC-E UPC-E Enable/Disable Enable UPC-E Check Character Transmission Send 2D Component Not UPC-E 2D Component Required Expand UPC-E to EAN-13 Don’t Expand Expand UPC-E to UPC-A Don’t Expand...
  • Page 291 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Add-Ons Disable P2, P5 and Optional Add-ons Optional Add-On Timer 70 ms Optional GS1-128 Add-On Timer Disable Code 39 Code 39 Enable/Disable...
  • Page 292 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Code 128 Code 128 Enable/Disable Enable Expand Code 128 to Code 39 Don’t Expand Code 128 Check Character Transmis- Don’t Send sion Code 128 Function Character Trans- Don’t Send...
  • Page 293 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Follett 2 of 5 Follett 2 of 5 Enable/Disable Disable Standard 2 of 5 Standard 2 of 5 Enable/Disable Disable Standard 2 of 5 Check Character Cal-...
  • Page 294 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Codabar Set Length 1 Codabar Set Length 2 ABC Codabar Disable ABC Codabar ABC Codabar Enable/Disable Disable ABC Codabar Concatenation Mode Static...
  • Page 295 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number GS1 DataBar™ Limited GS1 DataBar™ Limited Enable/Disable Disable GS1 DataBar™ Limited GS1-128 Emu- Disable lation 2D component not GS1 DataBar™ Limited 2D Component...
  • Page 296 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number CODE SELECTION - 2D SYMBOLOGIES 2D Maximum Decoding Time 350msec 2D Structured Append Disable 2D Normal/Inverse Symbol Control Both Aztec Code Enable / Disable...
  • Page 297 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Micro PDF417 Set Length 1 Micro PDF417 Set Length 2 0366 QR Code Enable / Disable Enable QR Code Length Control Variable...
  • Page 298 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Page Parameter Default Your Setting Number Erase Batch Memory RF Batch Mode Transmit Delay No Delay Unlink Label Direct Radio Autolink Required Source Radio Address Transmission Do not include...
  • Page 299 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults Restore Factory If you want to restore the Factory Configuration for your imager, scan either the Restore USA Fac- Configuration tory Configuration barcode or the Restore EU Factory Configuration barcode below. Both labels restore the reader configuration to the factory settings, including the interface type.
  • Page 300 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix C: Standard Defaults...
  • Page 301 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix D: Keypad Appendix D: Keypad Use the barcodes in this appendix to enter numbers as you would select digits/characters from a keypad. www.balluff.com...
  • Page 302 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix D: Keypad Make a mistake? Scan the CANCEL barcode to abort and not save the entry string. You can then start again at the beginning. CANCEL...
  • Page 303 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Appendix E: Scancode Tables Control Control character emulation selects from different scancode tables as listed in this appendix. Character Each of the control character sets below are detailed by interface type in the tables. These apply Emulation to Wedge and USB Keyboard platforms.
  • Page 304 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Interface Type Scancode Set When Control Character is 00 or 01 PC AT PS/2, USB-Keyboard or USB- Keyboard for APPLE NULL C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+...
  • Page 305 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Scancode Set When Control Character is 02 Enter Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓ Cr ↑  Keyp Enter    Spac “...
  • Page 306 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Interface Type Scancode Set When Control Character is 00 or 01 PC AT PS/2 Alt Mode or USB- Keyboard Alt Mode Alt+0 Alt+0 Alt+0 Alt+0 Alt+0 Alt+0 Alt+0...
  • Page 307 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Interface Type Scancode Set When Control Character is 02 PC AT PS/2 Alt Mode or USB- Keyboard Alt Mode (continued) Enter Ar↓ Ar↑ Al↓ Al ↑ Cl ↓...
  • Page 308 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Digital Interface Scancode Set When Control Character is 00 or 01 NULL C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ Enter C(S)+ C(S)+ C(S)+ C(S)+...
  • Page 309 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables IBM31xx 102- Scancode Set When Control Character is 00 or 01 NULL C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ Enter C(S)+ C(S)+ C(S)+ C(S)+...
  • Page 310 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables IBM XT Scancode Set When Control Character is 00 or 01 NULL C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ C(S)+ Enter C(S)+ C(S)+ C(S)+...
  • Page 311 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables Microsoft Windows-1252 is a character encoding of the Latin alphabet, used by default in the legacy com- Windows ponents of Microsoft Windows in English and some other Western languages.
  • Page 312 Balluff BVS HS-P Family Industrial Handheld Barcode Readers Appendix E: Scancode Tables...
  • Page 313 Balluff BVS HS-P Family Industrial Handheld Barcode Readers ASCII Chart ASCII Chart ASCII ASCII ASCII ASCII Hex No. Hex No. Hex No. Char. Char. Char. Char. ‘ “ & ’ < > www.balluff.com...
  • Page 314 World Headquarters Subsidaries Germany Balluff GmbH Balluff Inc. Schurwaldstraße 9 8125 Holton Drive 73765 Neuhausen a.d.F. Florence, Deutschland Kentucky 41042-0937 Tel. +49 7158 173-0 Phone (859) 727-2200, Fax +49 7158 5010 1-800-543-8390 balluff@balluff.de applications@balluff.com www.balluff.com...

This manual is also suitable for:

Bvs hs-pb-dpw-mz-01Bvs hs-pc-hdw-ma-01Bvs hs-pb-hdw-mz-01Bvs hs-pc-dpw-ma-01Bam md-vs-001-0003Bam md-vs-001-0002 ... Show all

Table of Contents