Label Id Control; Label Id Symbology Selection − 1D Symbologies - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes

Label ID Control

IDCO01(CR)
Label ID
Symbology
−
Selection 1D
Symbologies
www.balluff.com
This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbol-
ogy type.
DEFAULT
Label ID Transmission = Enable as Prefix
This option selects the symbology for which a Label ID is to be configured. See
page 62 or page 254 in "References" for more detailed instructions.
If less than the expected string of 3 characters are selected, scan the ENTER/
EXIT barcode twice to accept the selection and exit Programming Mode.
NOTE
$CACID
Set ABC Codabar Label ID Character(s)
$CALID
Set Anker Plessey Label ID Character(s)
$CPAID
Set Australian Postal Code Label ID
Character(s)
$CCBID
Set Codabar Label ID Character(s)
IDCO00(CR)
Label ID Transmission = Disable
IDCO02(CR)
Label ID Transmission = Enable as Suffix
$CP3ID
Set Code 32 Pharmacode Label ID
Character(s)
$CC9ID
Set Code 93 Label ID Character(s)
$CI8ID
Set Concatenated ISBT 128 Label ID
Character(s)
$CDPID
Set Danish PPT Label ID Character(s)
"Label ID" on
63