Erase Batch Memory; Rf Batch Mode Transmit Delay - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
Erase Batch
Memory
RF Batch Mode
Transmit Delay
216
When the reader is configured in Manual Batch Mode, use the following barcode to erase any
labels stored in batch memory.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
NOTE
BatchClear
Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.
DEFAULT
$CBTTD05(CR
RF Batch Mode Transmit Delay = 50 mS
$CBTTD32(CR

RF Batch Mode Transmit Delay =

0.5 seconds
$CBTTDFA(CR
RF Batch Mode Transmit Delay =
2.5 seconds

Erase Batch Memory

$CBTTD00(CR
RF Batch Mode Transmit Delay = No Delay
$CBTTD0A(CR
RF Batch Mode Transmit Delay = 100 mS
$CBTTD64(CR
RF Batch Mode Transmit Delay = 1 second