Wireless Beeper Features; Good Transmission Beep; Beep Frequency - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
3.11.1 Wireless Beeper
Features
Good
Transmission
Beep

Beep Frequency

www.balluff.com
Several options are available to configure beeper behavior for RF operation.
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs when a
Label is correctly transmitted to the base.
$CBT-
Good Transmission Beep = Enable
Adjusts radio-specific beep indications to sound at a low, medium or high frequency, selectable
from the list below (controls the beeper's pitch/tone).
DEFAULT
$CBTBF01(CR
Beep Frequency = Medium
$CBT-
Good Transmission Beep = Disable
DEFAULT
$CBTBF00(CR
Beep Frequency = Low
$CBTBF02(CR
Beep Frequency = High
209