Bosch BSA 43 Series Original Instructions Manual page 51

Step
3. Start of measurement
i
Measurement is only possible using
remote control.
4. Out-of-roundness measurement
(optional):
¶
Press brake pedal and hold steady
at a braking force greater than 500 N.
¶
Press out-of-roundness button.
i
This measurement is only possible
using remote control.
Robert Bosch GmbH
Manual mode (normal operation) | BSA 43xx | 51
Remote control Result / Display
 Announcement phase:
$
The tester motors start up,
the test rollers turn.
$
+
The rolling resistance is measured.
+
 Ready for braking force measurement.
i
The measurement can be terminated at any time
with the STOP button.
 The out-of-roundness of the brakes is measured
for 5 seconds.
 The current values are displayed on the screen:
$
Out-of-roundness (~).
$
Pedal force (PD).
Out-of-roundness
button
en
|
1 691 606 210 2015-07-29