Bosch BAT 131 Original Instructions Manual

Battery tester
Hide thumbs

Advertisement

BAT 131
en Original instructions
fr Notice originale
es Manual original
Battery Tester
Vérificateur de bateries
Comprobadores de batarías

Advertisement

loading

  Related Manuals for Bosch BAT 131

  Summary of Contents for Bosch BAT 131

  • Page 1 BAT 131 en Original instructions fr Notice originale es Manual original Battery Tester Vérificateur de bateries Comprobadores de batarías...
  • Page 3 B�T ��� � � � � Contents English Sommaire Français �4 Índice Español Robert Bosch GmbH 1 689 989 132 2011-09-09...
  • Page 4: Table Of Contents

    Starter System Test electricians or trained personnel under the Starter System Test Results guidance and supervision of an electrician. ¶ Charging System Test Disconnect BAT 131 from the mains before Charging System Test Results opening. Additional Test Messages Unused Battery Mode �0 �.�.2...
  • Page 5: User Information

    1 684 465 625 for Bosch Battery Test Equipment". These instructions Operating Instructions 1 689 989 132 must be carefully studied prior to start-up, connec- tion and operation of the BAT 131 and must always be �.2 Product description heeded. Safety instructions All the pertinent safety instructions can be found in the separate manual "Important notes on and safety...
  • Page 6: Menu

    After export to an USB stick you can open the text-file with extension ""bty" preferable with Excel. tant that the battery is good and fully charged before any further system testing. �.7 Special accessory Designation Item number Current probe 1 681 354 034 1 689 989 132 2011-09-09 Robert Bosch GmbH...
  • Page 7: Battery Test Results

    Battery assessment (refer to Section 4.4) is only performed if the "B�TTERY POST �T TOP" option is selected. The BAT 131 retains the results of the last test only. When you start a new test, the last results are over- 3. �PPLIC�TION written.
  • Page 8: Starter System Test

    Press E to proceed with the charging system test, press  to print the test results, press MENU to 6. Press  to print the test results or  to return to the return to the Menu. Menu. 1 689 989 132 2011-09-09 Robert Bosch GmbH...
  • Page 9: Charging System Test Results

    In-vehicle testing. Tester has detected computer, ignition noise or parasitic drain. Make sure all vehicle loads are off including open doors and ignition switch. UNSTABLE BATTERY Out-of-vehicle. Weak battery, should be charged and retested. WIGGLE CLAMPS Clamps are not making good contact with battery terminals Robert Bosch GmbH 1 689 989 132 2011-09-09...
  • Page 10: Unused Battery Mode

    German industry norm Society of Automotive Engineers, the 100-2000 European labeling of CCA International Electrotechnical 100-1200 Commission Japanese Industrial Standard, shown on 26A17 thru a battery as a combination of numbers 245H52 and letters. 1 689 989 132 2011-09-09 Robert Bosch GmbH...
  • Page 11: Maintenance & Troubleshooting

    57 mm x 25.9 mm. 6.� Cleaning The housing and the display of the BAT 131 may only be 1. Unlock the printer door gently but firmly lifting up on cleaned using soft cloths and neutral cleaning agents.
  • Page 12: Changing The Cable Assembly

    Damage to the environment and hazards to personal health are prevented by properly disposing of BAT 131. The BAT 131 can test down to 5.5 volts when the unit’s internal batteries are not functioning. The tester dis- 2. Remove the screw.
  • Page 13: Troubleshooting The Display

    Troubleshooting the Printer disposing of BAT 131. If the BAT 131 is not connected to a 12-volt battery with at least 11.5 volts of power or the paper sensor Technical data does not detect paper in the compartment during the...