Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch BSA 43 Series Original Instructions Manual

en 40 | BSA 43xx | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate
impen-
danger
ding
WAR- Possible
impending
NING danger
CAUTION dangerous
Possible
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
|
1 691 606 210 2015-07-29
Severity of danger if inst-
ructions not observed
Death severe
or injury
Death severe
or injury
Minor
injury
2.

User information

2.1

Important notes

Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the BSA 43xx and must always be
heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Test Equipment" (user informa-
tion, order number 1 691 696 900). These instructions
must be carefully studied prior to start-up, connection
and operation of the BSA 43xx and must always
be heeded.
2.3

Configuration

!
Only Service personnel are authorized to make all the nec-
essary configuration settings and calibrate the sensors.
2.4

Other applicable documentation

i
These operating instructions do not apply to the
SDL 43xx.
BSA 43xx / SDL 43xx:
Document
User information
Product descriptions
R BSA 43xx
R SDL 43x
R SDL 410
R Remote control unit
Test log book de / en
Planning folder de / en
R BSA 43xx stand alone
(not BSA 436x)
R BSA 436x stand alone
R SDL 43x stand alone
R Testlane SDL 43xx
EU Declaration of Conformity
R BSA 43xx
R SDL 43xx
BSA 44xx:
Document
User information
Product descriptions
R BSA 44xx
R Remote control unit
Test log book de / en
Planning folder de / en
EU Declaration of Conformity
Order number
1 691 696 900
1 691 606 210
1 691 626 210
1 691 636 210
1 691 696 215
1 691 696 600 / 1 691 696 601
1 689 974 326
1 698 974 328
Order number
1 691 696 900
1 691 876 220
1 691 696 215
1 691 696 600 / 1 691 696 601
905 877 000 / 905 877 001
1 691 876 921
Robert Bosch GmbH