RS 125
8.5.
CHARGE SYSTEM
8.5.1.
CHARGE SYSTEM LAYOUT AND POWER SUPPLY
RAVE
CONTROL
UNIT
G/Bi
G/Bi
G/Bi
FLY WHEEL
CHARGE SYSTEM TEST
•
Start the engine and rev it up to 6000 rpm.
•
Measure DC voltage across battery terminals using a
multimeter set to the DC voltage scale.
•
Switch on the low beam lights.
•
Correct voltage reading is 13.5 to 15 Volts.
TROUBLESHOOTING
•
Check the condition of the 20A fuse.
•
Check the connections of flywheel, regulator and fuse
leads.
•
Check the flywheel.
•
Check the battery; see
•
Replace the regulator with one known to work properly.
KEY
V/AR
7,5
V/AR
15
R/AR
20
FUSES
REGULATOR
8.3.1.
ELECTRICAL SYSTEM
R/N
V
R
BATTERY
IGNITION
SYSTEM
LIGHT
SYSTEM
-
+
V
8 - 9