RS 125
•
Position the gearbox link rod and tighten the screw
(13).
•
Install the exhaust system; see
carburetor; see
•
Install the radiator; see
When finished with engine installation, go on to the next
operations.
•
Check that all engine mounting bolts and nuts are at
the correct torque.
•
Top up coolant level; see
•
Check drive chain slack and adjust as required; see
2.21.3.
NOTE Inspect any components you have disturbed and
check that:
-
electrical leads are secured correctly with the suitable
ties;
WARNING
The leads should not be twisted or trapped
under any components.
-
electrical connectors are connected to the matching
connectors;
-
hoses and hose couplings are inserted correctly and
fixed with suitable clips;
-
throttle and cold-start cables slide freely and do not bind
when you turn the handlebar.
6.1.1
Install the
4.3.1.
5.3.1.
2.10.1
ENGINE
6 - 15