RS 125
7.3.6.
COMPLETE REMOVAL OF THE GEAR SHIFT
LEVER
TORQUE WRENCH SETTINGS
Nut (1)
Screw (4)
PARTIAL REMOVAL:
•
Undo and release the nut (1).
•
Slide the actuating rod off the lever.
•
Undo and remove the nut (2).
•
Remove the gear shift lever and collect spindle (3) and
Belleville washer.
COMPLETE REMOVAL:
•
Remove the left fairing; see
•
Slacken the screw (4) and withdraw the gearbox link
rod.
•
Undo and remove the nut (2).
•
Remove the complete gear shift lever and collect
spindle (3) and Belleville washer.
5 Nm (0.5 Kgm)
10 Nm (1.0 Kgm)
7.1.2.
CHASSIS
7 - 43