RS 125
7.7.4.
FRONT BRAKE DISC REMOVAL
Read
1.2.1
carefully.
TORQUE WRENCH SETTING
Screws (1)
•
Remove the front wheel; see
NOTE The screws (1) are retained with LOCTITE
of an air gun is recommended to release the screws.
•
Release and remove the six brake disc screws (1).
WARNING
®
Apply LOCTITE
disc screws (1) on assembly.
NOTE To refit, start all screws (1) manually in their holes and
tighten in a cross pattern.
•
Remove the brake disc (2).
22 Nm (2.2 kgm).
7.5.2.
®
243. Use
243 to the threads of the brake
1
2
CHASSIS
7 - 79