APRILIA RS 125 Manual page 231

RS 125
•
Slacken the engine-to-frame mounting bolt (4) to
facilitate swinging arm removal.
NOTE Make sure to have the special tool no. 8101945
(socket for swinging arm spindle adjustment) ready at hand.
•
Working from the right-hand side, slacken the lockring
(5) fully using the special socket.
•
Slacken the adjusting bush (6).
•
Working from the left-hand side, release and remove
the swinging arm spindle (7) and collect the two
washers.
• Remove the swinging arm from the frame.
CHASSIS
7 - 99