Table of Contents
Advertisement
RS 125
•
Tighten the bolt (5) securing the top yoke (2) to the
slider.
•
Remove the wheel spindle (3).
•
Refit the wheel; see
•
Lower the hoist arm.
WARNING
Make sure the rear wheel stand (OPT) is
positioned
correctly
slings.
•
Detach the slings from the frame.
•
When finished, operate the front brake and press down
on the fork repeatedly.
•
Fork operation should be smooth and progressive.
There must be no traces of oil on the fork legs.
NOTE Check front suspension setting before riding the
motorcycle.
•
Install the mudguard; see
•
Install the air scoop; see
•
Install the front fairing.
7.5.2.
before
detaching
the
7.1.10
7.1.17.
3
CHASSIS
7 - 97
Advertisement
Chapters
Table of Contents
