Eaton PowerXL DA1 Communications Manual page 19

Display ID Access right
RUN
P5-05 505 ✓
P5-06 506 ✓
P5-07 507 ✓
Designation
ro/rw
rw Timeout –
Communications
dropout
rw Response in the event of
a communications
dropout
rw Ramp via fieldbus
Modbus RTU for variable frequency drive DA1, DC1, DE1 09/16 MN040018EN www.eaton.com
Value Description
range
Timeout
With an active communication link, if a valid telegram
is not received by the drive within the period set with
this parameter, the drive will react as set in P5-06.
0, 1, 2, 3 Modbus communication loss error
Possible values:
• 0: Switch off
• 1: Ramps down to a full stop and is switched off.
• 2: Ramps down to a full stop; no fault message.
• 3: Ramps to fixed frequency 8 (P2-08).
0, 1 Fieldbus Ramp Control
Possible values:
• 0: OFF. Ramps are controlled from internal drives
parameters
• 1: ON. Ramps are controlled by the fieldbus.
2 Modbus RTU
2.4 Communication parameters
DS
2
0
0
15