Sample System Configurations - Xerox DocuPrint t 180 System Generation Manual

Stages of the sysgen process
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE

3. 3Sample system configurations

Use the information provided in this chapter to select your
configuration specifications.
An overview description of the sysgen process is shown in Table 3-1.
Table 3-1. Sysgen process
Stage Description
1 You start the sysgen process.
2 The LPS displays system configuration information on the
screen in a format similar to the illustration in Table 3-2. The
items differ depending upon your system components and
the version of software you are using.
3 The system asks you if you want to make changes to the
configuration.
4 You answer "yes."
5 The LPS displays the Configuration Options menu.
6 You enter the number of a listed option to select or deselect
a feature. For some options, a further list of suboptions
displays.
7 The system incorporates the software for each feature you
select into the operating system, and creates a
configuration file (DISPCF.SYS).
Note: The printing system must have the appropriate
hardware installed to support the features specified.
Selecting uninstalled features may result in an
unsuccessful sysgen, an unusable system, or both.
8 You can modify the configuration file by using the mini
sysgen procedure to deactivate or reactivate a feature.
9 Once your system is configured successfully, you can get
a copy of the configuration information by printing the
customer billing report. Refer to the DocuPrint 180 LPS
Operations Reference for further details. This configuration
information assists you in recreating your basic system
configuration during a full sysgen.
3-1