Xerox DocuPrint t 180 System Generation Manual page 44

SYSGEN AND SYSGEN-RELATED PROCEDURES
Step Action
8.
9. Enter the patch ID's that are needed for the
system and press <ENTER>, OR just press
<ENTER>.
10. Enter Y and press <ENTER>.
NOTE: Do not do anything with the
keyboard or mouse during this operation
11. Apply any incremental patches. Refer to the "Steps for loading incremental patches" section at the end of
this chapter.
This completes the update sysgen using the auto command.
4-16
Table 4-3. Steps to perform an offline update sysgen using
the AUTO command (continued)
System response
The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
-------- -------
MER001 Patch to allow Mergenthaler fonts
only.
Enter patch ID's or press ENTER:
***RESUMING SYSGEN PATCHES***
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
The system reboots and displays:
; WOULD YOU LIKE TO COMPILE THE .IMP FILES AT
THIS TIME? (Y/N)
IFU IPFNTS IPFNTS
Lists all font families as they are compiled in the following
format.
IF1100 Font family "(specific font family)"
Upon completion of compilation, the system automatically
goes to logon class 1 and displays:
Class 1 selected
OS1000 Ready For Commands
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
hh:mm:ss