Sysgen Overview; Sysgen And Sysgen-Related Procedures - Xerox DocuPrint t 180 System Generation Manual

Chapter

1. Sysgen overview

2. Sysgen commands
3. Sample system configurations
4. Sysgen and sysgen-related
procedures
A. Sample JCL for transmission of
system software tapes
About the reference set
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
The Xerox DocuPrint 180 Laser Printing System—System
Generation Guide is one of ten documents that make up the
DocuPrint 180 Reference Set. The guide is divided into four chapters
and one appendix as listed.
Content
Types of sysgen available and the resources required
to perform a sysgen.
Sysgen commands and how to use them.
System configuration options and parameters.
Step-by-step installation and upgrade procedures for
the DocuPrint 180 PC User Interface and upgrade
procedures for full, update, and mini sysgens.
Example of a typical host utility for sending
concatenated files to the printing system.
This document is part of a reference set designed to help you receive
maximum benefit from your DocuPrint 180 Laser Printing System
(LPS).
To help you select the appropriate document for your needs, the
following section identifies the documents in the set and describes
the information contained in each.
Introduction
vii