Xerox DocuPrint t 180 System Generation Manual page 51

Step Action
5. Enter N to retain the existing ID or Y to
enter a new system ID and press
<ENTER>.
6. Enter Y or N and press <ENTER>.
7. Enter Y or N and <ENTER>. A Y and
<ENTER> response causes the change
menu to display. Each time a change is
made, the change question is asked until
an N and <ENTER> is entered, and the
sysgen program continues.'
To discard the changes you just made and
continue sysgen, enter Y.
To save the changes you just made and
continue sysgen, enter N.
8. Enter Y and <ENTER>.
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Table 4-5. Steps to perform an online update sysgen
System Response
Do you want to save the accounting file?
enter 'y' or 'n'
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes?
Enter 'y' or 'n'
>
Do you want to discard the changes you just
made? Enter 'y' or 'n' >
Is continuation of sysgen required? (y or n)
Should sysgen read from host or tape?
'h' or 't'
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-23