Xerox DocuPrint t 180 System Generation Manual page 38

SYSGEN AND SYSGEN-RELATED PROCEDURES
Step Action
18.
Enter 'h' (for host/online sysgen) or 't' (for
offline sysgen) and press <ENTER>.
NOTE: The system response is for offline
sysgen. For online sysgen refer to step 9 of
the Online Update
19. Key in B (boot) and press <ENTER>.
4-10
Table 4-2. Steps to perform a full sysgen (continued)
System response
Creating file DISPCF.SYS on drive 0.
Should sysgen read from host or tape? 'h' or
't'
Reading files from tape/host is displayed.
Each file is read from the online channel or tape and placed
on the disk.
Creating file xxxxxx.yyy on drive n
xxxxxx is the system file name,
yyy is the system file type, and
n is the drive number that the file is stored onto.
When sysgen completes, the following message displays:
* Tape rewinding * Sysgen process successful*
* Sysgen program off *
Enter Cmd ['C' for Menu]>
The OSS loads onto the system disk.
PC UI:
The messages window displays:
CPU Test Complete
Imaging Devices Present
Memory test in progress
Memory test complete
Loading Start-Up Task
XEROX DocuPrint 180
Laser Printing System
Version Revision
Disk ID = xxxx
The date window displays.
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE