Xerox DocuPrint t 180 System Generation Manual page 48

SYSGEN AND SYSGEN-RELATED PROCEDURES
Step Action
14. Enter the patch ID's that are needed for the
system and press <ENTER>, OR just press
<ENTER>.
15. Enter Y and press <ENTER>.
16. Apply any incremental patches. Refer to the "Steps for loading incremental patches" section at the end of
this chapter.
This completes update sysgen using the sysgen command.
4-20
Table 4-4. Steps to perform an offline update sysgen using
the SYSGEN command (continued)
System response
***RESUMING SYSGEN PATCHES****
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
The system reboots and displays:
; WOULD YOU LIKE TO COMPILE THE .IMP FILES
AT THIS TIME? (Y/N)
IFU IPFNTS IPFNTS
Lists all font families as they are compiled, in the following
format.
IF1100 Font family "(specific font family)"
Upon completion of compilation, the system automatically
goes to logon class 1 and displays:
Class 1 selected
OS1000 Ready For Commands
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
hh:mm:ss