Xerox DocuPrint t 180 System Generation Manual page 34

SYSGEN AND SYSGEN-RELATED PROCEDURES
Step Action
4. Format the system disks by entering
FORMAT or ERASE and pressing
<ENTER>.
NOTE: System responses reflect the format
procedure. The Erase procedure mimics the
format procedure with the exceptions of
"erase" appearing in some places where
format had been displayed.
5. Enter Y to continue with the format
6. Enter Y to confirm that you want to continue
the formatting of the disk(s).
NOTE: DP3: will only be displayed if
installed.
4-6
Table 4-2. Steps to perform a full sysgen (continued)
System response
The following message displays:
Formatting/Erasing the disks will destroy the
data.
Do you still want to format/erase the
disk(s)? (y or n)
Are you sure? [y or n]
For Y, the following is displayed:
**SCSI FORMAT/ERASE VERSION XX RUNNING**
Program operating mode: FORMAT
Located DP0: ...(manufacturer) (disk type)
Located DP1: ...(manufacturer) (disk type)
Located DP2: ...(manufacturer) (disk type)
Located DP3: ...(manufacturer) (disk type)
FORMAT OPTIONS:
1. All disks
2. Selected disk(s)
>
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE