Xerox DocuPrint t 180 System Generation Manual page 47

Step Action
11. Key in B (boot) and press <ENTER>.
12. Enter the month (MM), day (DD), and year
(YY) in the appropriate boxes of the date
window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
Enter the hour (HH), minute (MM), and
second (SS) in the appropriate boxes of the
time window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
13.
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Table 4-4. Steps to perform an offline update sysgen using
the SYSGEN command (continued)
System response
The OSS loads onto the system disk.
The messages window displays:
CPU Test Complete
Imaging Devices Present
Memory test in progress
Memory test complete
Loading Start-Up Task
XEROX DocuPrint 180
Laser Printing System
Version Revision
Disk ID = xxxx
The date window displays.
The time window displays.
The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
-------- -------
MER001 Patch to allow Mergenthaler fonts
only.
Enter patch ID's or press ENTER:
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-19