SYSGEN AND SYSGEN-RELATED PROCEDURES
Step
Action
1.
Press the Boot button.
2.
Select your choice of sysgen media with
the mouse.
3.
Key in MINI and press <ENTER>.
4.
Enter Y or N and <ENTER>. A Y and
<ENTER> response causes the change
menu to display. Each time a change is
made, the change question is asked until
an N and <ENTER> is entered, and the
sysgen program continues.
To discard the changes you just made
and continue sysgen, enter Y.
To save the changes you just made and
continue sysgen, enter N.
Enter N and <ENTER>.
5.
4-28
Table 4-6.
Steps to perform a mini sysgen
System response
:The Boot menu window displays:
Operating System
System Disk
Reel to Reel
QIC
18/36 Track Tape
The command menu displays:
COMMANDS
BOOT
SYSGEN
FORMAT
HOSTCOPY
AUTO
MINI
ERASE
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter
'y' or 'n' >
Do you want to discard the changes you
just made? Enter 'y' or 'n'
Creating file DISPCF.SYS on drive 0.
* Sysgen program off *
Enter Cmd ('C' for Menu)>
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Display Commands
Boot the operating system
Build or update system files
on disk from tape or host
Format and initialize disk
pack
Copy user files from host to
disk
Auto Sysgen
Configuration change only
Erase all files.