Xerox DocuPrint t 180 System Generation Manual page 39

Step Action
20. PC UI:
Enter the month (MM), day (DD), and year
(YY) in the appropriate boxes of the date
window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
Enter the hour (HH), minute (MM), and
second (SS) in the appropriate boxes of the
time window (use the <TAB> key to advance
from box to box) and select the Apply/Close
header button.
Terminal:
Enter the date and time. Entry of the
seconds (ss) is optional.
Enter Y or N to indicate whether time and
date are correct.
21.
22. Enter the patch ID's that are needed for the
system and press <ENTER>, OR just press
<ENTER>.
23. Select Yes for 2000 reports or No for 100
reports.
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
Table 4-2. Steps to perform a full sysgen (continued)
System response
The time window displays.
mm/dd/yy hh:mm:ss
ARE THE DATE AND TIME CORRECT AS
DISPLAYED (Y/N)?
The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
---------------- --------------
MER001 Patch to allow Mergenthaler
fonts only.
Enter patch ID's or press ENTER:
***RESUMING SYSGEN PATCHES***
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
PC UI:
The system reboots, the message window appears followed
by the appearance of the OS2660 accounting reports
message window.
.
Upon your selection of Yes or No, the system begins and
completes the loading and testing process
Class 1 selected
OS1000 Ready For Commands
SYSGEN AND SYSGEN-RELATED PROCEDURES
hh:mm:ss
4-11