#
!
Click on the [Ports] tab.
3
The Ports tab will be displayed.
!
Check the box appropriate to the connection.
4
For a parallel connection, check LPT1, LPT2 or LPT3 depending on the configuration of
the workstation. This is usually LPT1.
For a USB connection, check the USB box.
!
Click [OK].
5
Follow the instructions for "Test Print or Scan" starting on page 2-28 to continue the
installation.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
This window will have a different appearance according to the operating system of the
workstation and the type of driver installed. The window displayed is for a Windows XP operating
system.
Page 2-27