Xerox M20/M20i User Manual page 61

Paper Supply Status
Map
"
Use to select the
paper source.
Bypass
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
The Status Map identifies
which paper tray is
selected, when a paper
tray is empty and when an
error occurs.
Document
Feeder Error
Bypass
Paper
Jam
Tray 1
Tray 2
Use to notify the machine
the type of paper loaded
in the Bypass Tray.
!
Press [Copy].
!
To select a paper tray, press the [Paper Supply]
key until the required tray is lit on the Status Map.
The Status Map identifies which paper tray is
selected, when a paper tray is empty and when an
error occurs. The Status Map has a light for each
paper tray.
Each time the [Paper Supply] key is pressed, a
different tray is selected and a green light displays
to indicate the selected tray. When two tray lights
display together, the Auto Tray Switching feature
is active. This enables the machine to switch to a
different tray if the current tray runs out of paper.
If a paper tray is empty, the light will flash and if
enabled, an error tone will sound.
!
If the Bypass Tray is selected the Paper Type
option displays. Use the Navigation Keys to
select the Paper Type being loaded and press
[Enter].
If using the Bypass, remember to load the
required stock.
Page 3-9