Replacing The Toner; Setting The Product To Send Toner Low Information - Xerox M20/M20i User Manual

Replacing the Toner

5
Cartridge:
!
!
!
!
!

Setting the Product to Send Toner Low Information

If the Notify Toner menu option is set to On, when the toner cartridge needs to be replaced,
the machine automatically sends a fax to the service company or the dealer to notify them that
the machine requires a new toner cartridge. This feature will be activated only when the phone
number of the service company or the dealer is stored in the machine's memory.
#
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Shake the new toner cartridge
horizontally four or five times.
Slide the new toner cartridge in
until it locks in place.
Turn the toner locking lever
downwards until it locks in place.
Close the front cover and the side
cover.
The display shows [New Toner?],
select [Yes] and press [Enter].
The machine returns to standby.
For instructions on setting the Send Toner Low Information to On, refer to "Maintenance Tools"
on page 9-25.
Page 10-7