Enhanced Copy; Specific Copy Settings - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 76 Mercredi, 11. août 2004 4:48 16

Enhanced copy

Position the document face down (refer to paragraph Document positioning, page 65).
Press key
Enter the desired number of copies and press OK to confirm.
Choose
confirm.
Set the desired zoom value
press OK to confirm.
Choose the copy output type between
to confirm.
Set the required origin values with keys
confirm.
Set the required contrast value with keys
Set the required brightness value with keys
Choose the type of paper
confirm.
Choose the paper tray,
and press OK to confirm.
When the copy quality is no longer satisfactory, you can perform a calibration.
To do so, refer to paragraph Scanner calibration, page 110.
Moreover, a high number of controls let you improve the copy quality.
Scanner settings
•
RESOLUTION
• settings to reduce or magnify any portion of a document by choosing the origin and value
ZOOM
of the zoom to apply to that portion.
• The assembly parameter to choose between
• The
ORIGIN
•
CONTRAST
•
BRIGHTNESS
•
L/R MARGINS
• A4 or LETTER to choose the format.
machine settings
• is used to tell your machine what type of paper you use by default.
PAPER
• is used to tell your machine which paper tray shoud be used by default.
TRAY
•
L/R MARGINS
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
.
, or
FAST QUALITY PHOTO
25% TO 400%
COPY ASSEMBLED
NORMAL PAPER
AUTOMATIC TRAY
S
PECIFIC COPY SETTINGS
to set the photocopy resolutation.
parameter to choose the origin to be applied to the document.
to choose the photocopy contrast.
is used to make your original document lighter or darker.
to shift the margins or your original document to the left or to the right.
to shift the margins of your document to the left or to the right.
- 76 -
resolution with the keys
with keys or and the numerical keypad, then
or
NOT ASSEMBLED
or the numerical keypad and press OK to
or and press OK to confirm.
or and press OK to confirm.
, with keys
THICK
, or
UPPER TRAY LOWER TRAY
or
ASSEMBLED NOT ASSEMBLED
Operation
or , then press OK to
and press OK
or and press OK to
with keys or
copies.