Xerox FaxCentre F116 User Manual page 116
Xerox fax machine user manual
Hide thumbs
Also See for FaxCentre F116:
- Specifications (2 pages) ,
- Quick reference manual (2 pages) ,
- Service manual (196 pages)
Table of Contents
Advertisement
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 112 Mercredi, 11. août 2004 4:48 16
Code 08 - Quality
The document you sent was not well received. Contact your group dial to see if you need to send again.
Code 0A - No document to be polled
You tried to poll a document from a group dial who had not prepared his document (no deposit) or the
password entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages indicated during preparation for the transmission
and the number of pages sent- check the number of pages in the document.
Code 0C - Received document error
Ask the group dial who called you to check the length of his document (it may be too long to be
completely received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 0E - Unknow e-mail address
Check the e-mail address.
Code 13 - Memory full
Your machine can no longer receive since its memory is full. There are too many received unprinted
documents or too many documents in the transmission line.
Print the received documents and delete or transmit immediately the documents in the transmission
line.
Code 14 - Memory full
Received document memory full.
Code 15 - Unknown mailbox number
You wish to deposit a document in a group dial mailbox. The mailbox number does not exist.
Code 16 - No Relay Bcst list Nr x
You requested a document relay from a remote fax but the fax has not programmed the list of group
dial requested.
Code 17 - Unknown mailbox number
You wish to recover a document from a group dial mailbox. The mailbox number does not exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote fax which does not have the relay broadcast function.
Code 19 - Group dial has stopped
The communication has been stopped by your group dial. (Example: a fax wanted to poll your fax but
there is no document deposited).
Code 1A - Disconnected
The transmission has not started. The telephone line is busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your group dial to resend the document.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Maintenance.fm
- 112 -
Maintenance
Advertisement
Table of Contents
