Laser Safety Information; Operational Safety Information - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 126 Mercredi, 11. août 2004 4:48 16
L
CAUTION: Use of controls, adjustments or performance of procedure other than those specified
herein may result in hazardous light exposure.
With specific regard to laser safety, the equipment complies with performance standards for laser
product set by government, national and international agencies as a Class 1 laser product. It does not
emit hazardous light, as the beam is totally enclosed during all phases of customer operation and
maintenance.
O
PERATIONAL
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times.
Do These:
• This equipment is supplied with a plug that has a protective ground pin. This plug will install only
into a grounded electrical outlet. This is a safety feature. To avoid risk of electric shock, contact
your electrician to replace the electrical outlet if you are unable to insert the plug into it. Never
use a plug that lacks an ground connection machine to connect the product to an electrical outlet.
- Always follow all warnings and instructions that are marked on or supplied with the
equipment.
- Always exercise care when moving or relocating equipment. Please contact your local Xerox
Service Department, or your local support organization to arrange relocation of the product to a
location outside of your building.
- Always locate the equipment in an area that has adequate ventilation, and the room for
servicing. See section one Installation.
- Always use materials and supplies specifically designed for your Xerox equipment. Use of
unsuitable materials may result in poor performance.
- Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
- Never use a plug that lacks a ground connection from the machine to an electrical outlet.
- Never attempt any maintenance function that is not specifically described in this
documentation.
- This equipment should not be placed in a built-in installation unless proper ventilation is
provided, please contact your Authorized local dealer for further information.
- Never remove covers or guards that are fastened with screws.
- There are no operator serviceable areas within these covers.
- Never locate the equipment near a radiator or any other heat source.
- Never push objects of any kind into the ventilation openings.
- Never override or "cheat" any of the electrical or mechanical interlock devices.
- Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Sécurité.fm
S I
ASER AFETY NFORMATION
S
AFETY
- 126 -
I
NFORMATION
Safety