Access To Servers Parameters - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 50 Mercredi, 11. août 2004 4:48 16
Enter connection
Enter connection
Enter Email
Enter Email
Enter
E-MAIL ADR

Access to servers parameters

Enter
SMTP
Enter
POP3
Enter
DNS 1
Enter
DNS 2
Access to the authentification SMTP parameters
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
In the PARAMETERS menu, select ID.MESS.SERV to keep the same identification parameters as
in the messaging service or AUTHENT. SPEC. to define other identification parameters, then
validate with Access to SMTP authentification parameters
by pressing OK key. When you select AUTHENT. SPEC, carry out the two following operations:
Enter the IDENTIFIER then validate with OK key.
Enter the PASSWORD then validate with OK key.
Sample Internet settings for the machine (56 kbps modem)
Your access provider should give you the following information:
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Configuration.fm
1
, press OK.
IDENTIFIER
, press OK.
PASSWORD
M 922 OK - INTERNET / INIT PROVIDER / MESS. SERV
press OK.
IDENTIFIER,
press OK.
PASSWORD,
, press OK.
M 923 OK - INTERNET / INIT PROVIDER / SERVERS
, press OK.
, press OK.
(primary), press OK.
(secondary), press OK.
M 924 OK - INTERNET / INIT PROVIDER / SMTP AUTHENT.
CALL NUMBER:
CONNECTION IDENTIFIER:
CONNECTION PASSWORD:
MESSAGE SERVICE IDENTIFER:
MESSAGE SERVICE PASSWORD:
E-MAIL ADDRESS:
- 50 -
Setting Up Your Machine
08 60 00 10 00
sg048944@wn.net
*****
demo jt12
*****
demo2@gofornet.com