Machine Packing And Transportation - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 120 Mercredi, 11. août 2004 4:48 16
Flatten documents if needed.
Help the sheets along.
The machine does not receive any faxes
Check that the telephone line cable is correctly plugged in and that there is a tone signal on the
telephone line by means of the
You receive a blank page
Make a copy of a document ; if it is correct then your machine is functioning normally. Call back the
group dial and have him resend the document. It was probably sent with the sheet inserted backwards.
You cannot send a fax
Check that the telephone line cable is correctly plugged in.
Check the tone by pressing key
Check the prefix is correctly programmed and used.
M
ACHINE PACKING AND TRANSPORTATION
Always use the original package when transporting the machine. Failure to do so could void the
warranty.
1 - Disconnect the machine from the telephone network and the AC power socket.
2 - Open the front cover.
3 - Shut the front cover. Unplug the phone line cord and the AC power cord, the document holder
and the document tray. Put them in the original package.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Maintenance.fm
key.
.
- 120 -
Maintenance