Recording The Line 2 Number (Model F116L); Selecting The Manual Transmission Mode Line - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 45 Mercredi, 11. août 2004 4:48 16
Setting Up Your Machine
R
ECORDING THE LINE
On your machine, the fax machine number defined by selecting M 22 in the operator menu
is allocated implicitly to line 1 (L1).
You can record the fax machine number that corresponds to line 2 (L2) on you machine.
This number is send to the people you call and may also appear at the header on each page
of any documents you send them.
To record the number of line 2 (L2) on your machine, press the keys M 2 6 2, then enter
or modify the number.
NOTE : If line 2's number (L2) is not defined, by default it takes the value of line 1.
S
ELECTING THE MANUAL TRANSMISSION MODE LINE
In manual transmission mode, you must always select the line (L1 or L2) to be used.
To do so, there is an additional selection possible in the transmission note.
Selecting:>> LINE L1 selects the line to be used for the transmission. Pressing the
keys switches the LINE L1 (model F116) selection to LINE L2 (model F116L) and vice versa.
The additional selection of the line to be used is offered in the following transmission notes:
• Single or multi-recipient transmission.
• Report request.
• Transmission to a mailbox.
• Mailbox report.
• Re-transmisison.
NOTE : The selection of the line to be used in the transmission notes is only offered if your machine is confi-
gured in manual transmission mode. If it is not, the selection is not offered. The default transmission
line offered is line 1 (L1).
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Configuration.fm
2 (
NUMBER MODEL
- 45 -
F116L)
and