Scanner Settings - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 77 Mercredi, 11. août 2004 4:48 16
Operation
Caution -
All the settings performed through this menu will become the machine's default
settings.
To access to the settings:
Select the
Use the keys
to modify.

Scanner settings

Resolution
Set the desired resolution
Confirm your setting by pressing key OK.
Zoom
Your machine offers to reduce or magnify a specific part of a document from 25 % to 400 %.
Enter the desired zoom value with the numerical keypad.
Confirm your setting by pressing key OK.
Assembly
Choose the copy type between
Confirm your choice by pressing key OK.
Origin
If you wish, you can change the origin of the scanner.
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move the
scanning zone as shown on the figure below.
y
x
Select the X and Y coordinates with keys
Set the required coordinates with the numeric keypad or
Confirm your setting by pressing key OK.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
M 84 OK - ADVANCED FCT / SCAN. & PRINT
or the to be set and press OK to confirm.
SCANNER MACHINE
or of the navigator to scroll the described hereafter settings you want
,
FAST QUALITY
ASSEMBLED
scanned area
Top view: scanned side down
- 77 -
or with keys or .
PHOTO
or .
NOT ASSEMBLED
or .
or .