Xerox FaxCentre F116 User Manual page 13

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 9 Mercredi, 11. août 2004 4:48 16
Installation
• Always take care that paper clips, staples, or other small pieces of metal do not get into the
machine through its vents or other openings. Such objects create the danger of fire or elec-
trical shock.
• Do not allow water or other liquids to spill on or near the machine. Fire or electrical shock
can occur should water or liquid come into contact with the machine.
• Should liquid or any piece of metal accidently get inside the machine, immediately turn it
off, unplug the power cord, and contact your dealer. Failure to take this immediate action
creates the danger of fire or electrical shock.
• Whenever the machine emits unusually high amounts of heat, smoke, an unusual odor, or
noise, immediately turn it off, unplug it, and contact your dealer. Failure to take this imme-
diate action creates the danger of fire or electrical shock.
• Paper for machine: do not use paper previously printed by your machine or any other
machine: the ink or toner deposited on that paper might damage the printing system
of your machine.
Caution -
Be sure to locate the machine in a well-ventilated location. A minimal amount
of ozone is generated during normal operation of this machine. Because of this, an
unpleasant odor may result when the machine is used for extensive printing in a poorly
ventilated area. For a comfortable, healthy, and safe operation, be sure to locate the
machine in a well-ventilated area.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Installation.fm
- 9 -