Page Queue - Tadiran Telecom FlexSet 280S User Manual

Page Queue

Use Page Queue to send or retrieve a call to/from a Page Queue destination. After sending a call to Page Queue x,
your FlexSet is then freed to page all system members to announce there is a call on line x. The party put on hold
may hear one of the following: music, recorded tone, busy tone or no sound at all, as defined system-wide for each
Page Queue.
Press [Page_Q] to access the Page Queue options.
10:50 26 May 2004 site name
user name
Redial Page_Q
Page_Q Place/Pickup Call
PageQ1 PageQ2
x
[PageQ ] While on a call, press [PageQ
station or trunk.
To pickup a queued call, press [PageQ
You can pick up the call from any station by selecting the relevant Page Queue number.
If the call is not picked up within a predetermined time, it will automatically return to the originating station from
which Page-Queue was placed. Press
NANS page Q dial# 2nd party
DND Mute
Station Features
Page Queue
station number
Hold Remind PickUp
PageQ3 PageQ4 PageQ5
x
] (x = 1 to 10) to send the call to Page Queue number x, where x is a parked
x
or pick up the handset to answer.
SPKR
FwdAll Number
10:50 26 May 2004 site name
Page_Q
Page_Q Place/Pickup Call
PageQ1
] to retrieve the call from Page Queue number x.
NANS page Q dial# 2nd party
DND
130
user name station
Hold Remind
PageQ2 PageQ3
Mute FwdAll
FlexSet 120S/280S User Guide
Page 1
Page 2