[VP-Rcv]
Voice Page Receive toggles the availability of your station to receive Voice Pages. Press [VP-Rcv] once to
activate, press again to deactivate. When activated, a bullet is displayed next to [VP-Rcv].
[ElapTm]
Elapsed Time Display toggles the display of the time spent during an incoming or outgoing external or
network call. When activated from idle, Elapsed Time makes the duration of a call automatically display
whenever the call is established. When activated during a call, Elapsed Time displays duration of the
current call.
The elapsed time is shown in HH:MM:SS format up to (13 hours) 12:59:59.
NOTE:
From Idle:
Press [Setup] [ElapTm] once to activate, press again to deactivate.
A bullet is displayed next to [ElapTm] on the Setup screen, and next to the [ElapTm] soft key that is
displayed whilst on a call.
During a call:
Press [ElapTm] once to activate or deactivate the Elapsed Time display. When the conversation is over,
the Elapsed Time feature reverts to the state it was set to before the conversation started.
[HeadSt]
Headset Only. This feature is designed for users operating in headset mode. When activated, the
Headset Only feature causes calls to be conducted via the headset and disables the FlexSet microphone
and loudspeaker, along with the features that use these devices (e.g. music, voice page). Calls are
conducted via the headset, even if the cradle switch is on-hook.
Press [HeadSt] to activate and deactivate the Headset Only feature.
When activated, a bullet is displayed next to [HeadSt].
[IdlDsp]
Idle Display. When in Idle mode, the first line of the display shows the time, date and site name, and
the second line displays your name and station number. Press [IdlDsp] to toggle the display of these
system lines on or off.
Station Features
Setup: Telephony Features
The system may be programmed with a limit on the duration of your external calls. Once this
limit is reached, the call will be automatically disconnected.
158
FlexSet 120S/280S User Guide
Need help?
Do you have a question about the FlexSet 280S and is the answer not in the manual?
Questions and answers