Auto Set Relocate - Tadiran Telecom FlexSet 280S User Manual

Auto Set Relocate

Auto Set Relocate enables you to transfer your station and all your station's predefined features to a new location,
thus sparing you the inconvenience of having to re-enter all the stored speed numbers and to reset previously defined
features at your new permanent or temporary location. This feature enables you to use any FlexSet available from
your Coral system while keeping your unique extension dial number.
FlexSets are defined to have either Permanent (see page 57) or Temporary (see page 58) Auto Set Relocate feature
enabled. Before activating this feature, contact your system administrator to determine what your Auto Set Relocate
setting is. If you are defined as permanent, you will not be able to use temporary (unless redefined by your system
administrator), and vice versa.
Auto Set Relocate is accessed by pressing [Setup] [MoveSt] or [AcdUcd] [MoveSt] from the idle screen.
10:50 26 May 2004 site name
user name
COS-Sw Setup
RELOCATE
ENTER SOURCE NO.
When invoking the Auto Set Relocate feature, incorrect information may be sent to the local
WARNING:
Emergency or E911 Center. Before activating this feature, contact your local administrator to
ensure that your new and current system profiles are compatible with the E911 Center.
Station Features
Auto Set Relocate
station number
Trace RoomSt BG:Fwd
10:50 26 May 2004 site name
user name
Exec
RELOCATE
ENTER SOURCE NO.
56
station
COS-Sw Setup
Page 1
Page 2
FlexSet 120S/280S User Guide