NOTES:
•
This feature can be activated while you are silent monitoring the whispered party (see page 164). Then you
can be heard by the whispered party, as well as hear the two conversing parties.
•
When you hear the reorder tone and the DND WHISPER message appears, the station is protected from
receiving whisper paging calls.
•
If you hear the reorder tone and the ON-HOOK BY message appears, the receiving party has rejected your
whisper page.
Receiving a Whisper Page:
1. Hear the whisper tone.
2. Listen to the whispered message when the tone stops.
If the second party hangs up the call while you are in whisper mode, you may continue to converse with the
NOTE:
whispering party without the need to reestablish the call. A RECONNECT (whisperer #/name)
message appears.
Rejecting an ongoing Whisper Page:
1. Press [DND-WP] upon receiving notice of an incoming whisper page.
The Whisper Page message disappears. Continue talking privately with the second party.
2. If required, press [DND-WP] again to enable your FlexSet to receive other whisper calls.
Placing the second party on hold and talking privately to the whisperer:
1. Press the flashing DSS key pre-programmed with the whisperer dial number (or the flashing second
The original conversing party is put on hold.
2. Converse with the whisperer.
3. After the whisperer disconnects, you are automatically reconnected to the original conversing party.
If you double-press the flashing DSS key (or the second
NOTE:
Station Features
Whisper Paging
key), this will initiate a 3-way call.
LOOP
182
LOOP
FlexSet 120S/280S User Guide
key).
Need help?
Do you have a question about the FlexSet 280S and is the answer not in the manual?
Questions and answers