Setup: Telephony Features - Tadiran Telecom FlexSet 280S User Manual

Setup: Telephony Features

The Feature Setup menu enables you to adjust the general features of your FlexSet.
Press [Setup] to access the Feature Setup options.
10:50 26 May 2002 site name
COS-Sw Setup
Feature Setup
Ring AutAns
[Ring] Ring Adjustment allows you to define the sound of your telephone ring. The following can be
adjusted:
[Volume]
[Cadence]
[Type]
[AutAns] Auto Answer activates your phone to answer all incoming calls automatically via the speakerphone
after a predetermined number of rings. Press [AutAns] once to activate, press again to deactivate. When
activated, a bullet is displayed next to [AutAns].
[VP-AA] Voice Page Auto Answer activates your phone to answer all incoming Voice Pages automatically via
the speakerphone after a predetermined number of rings. Press [VP-AA] once to activate, press again to
deactivate. When activated, a bullet is displayed next to [VP-AA].
Station Features
Setup: Telephony Features
user name station
Trace RoomSt
VP-AA VP-Rcv
Volume is used to change the volume of your FlexSet ring.
Cadence is used to change the cadence of your FlexSet ring.
Type is used to change the type of your FlexSet ring.
You can adjust the ring volume, cadence and type with the
[Next] and [Prev] soft keys (see page 25).
CAUTION!
Leaving your workstation while Auto Answer is activated will cause your station
to answer an incoming call. All conversation in the room can be heard. A trunk
call trapped in Auto Answer could lock up the trunk until released by the system.
10:50 26 May 2002 site name
BG:Fwd Exec
Feature Setup
ElapTm Ring
157
user name station
COS-Sw Setup
AutAns VP-AA
buttons, or by using the
FlexSet 120S/280S User Guide
Page 1
Page 2