Series Call - Tadiran Telecom FlexSet 280S User Manual

Series Call

Series is used to mark an external call before transferring it to a third party. This causes the call to return to you after
the third party hangs up. This feature can only be used during conversation.
Marking a call as a Series Call:
1. During conversation, press [Series] to mark the call.
2. Listen for the confirmation tone.
3. Transfer the call when you are ready.
The marked call will now return to you after the third party has hung up.
Should you try to mark a call that has already been marked the
NOTE:
When your telephone rings (third party hangs up):
1. The call will return to you with the SERIES message displayed.
2. Answer the call as normal when your station rings.
3. Ask calling party if transfer to another party is required; or
Set up the call as a series call; or
Hang up.
Station Features
Series Call
error message
155
will appear.
ALREADY SET
FlexSet 120S/280S User Guide