Page Queue - Tadiran Telecom T207M User Manual

Page Queue

Page Queue allows you to park a call (up to ten calls can be multi-parked simultaneously by default) on designated Page_Q
numbers by sending the call to one of ten Page Queue destinations. Once parked, a call can be either retrieved at your station
or another station. The call can be picked up from any system station by dialing a Page Queue access code (default access
codes are 7060-7069).
NOTE! To pick up the call, Mr. Doe should dial from any station to the relevant Page-Queue number. If
the call is not picked up within a predetermined time, it will automatically return to the originating
station from which Page Queue was placed. See
The party placed on Page Queue hears music.
To place a call in Page Queue:
1. While on a call, press
[Trns]
2. Listen for the dial tone.
3. Dial a free Page Queue number (ten options see
4. Listen for the confirmation tone. The
5. Announce that there is a call on Page_Q line x.
Using available means of communication, notify another user to pick up the call.
Usually announcing a call for pick up includes the name of the person being notified and the relevant Page_Q number.
,
To pick up a call placed in Page Queue (from any station):
1. Lift the handset of any telephone.
2. Dial assigned Page_Q access code (default codes: 7069-7069, see table
3. Begin speaking.
Station Telephony Features
Page Queue
.
Table on page 65
PARK-PICKUP Q
Return Call: on page 65
) to send the call to Page Queue number x.
message is displayed.
).
below
64
for details.
T207M / T208M User Guide