Table of Contents
Advertisement
LAN
The N432A has three LAN operating modes:
– Dynamic IP (Dynamic Host Configuration Protocol or DHCP)
– Auto IP (Local PC Control or isolated (non-site) LAN)
– Static IP (Manual mode)
The N432A uses the standard VXI-11 protocol for emulating GPIB over a TCP/IP
NOTE
link.
Configuring the N432A
– The IP address, subnet mask, and default gateway can be changed manually
– The IP address, subnet mask, and default gateway values are stored in
Selecting the LAN network type
You can connect and configure your N432A for a site LAN or an isolated (non-site)
LAN.
– A site LAN is defined as a local area network (LAN) in which PCs and
– An isolated (non-site) LAN is defined as a local area network (LAN) in which
Select the LAN network type you will use to connect the N432A to your PC. Then,
follow the procedure that corresponds to your selected LAN network type.
Keysight N432A Installation Guide
or remotely.
non-volatile memory and are not part of the save/recall function.
LAN-enabled instruments are connected to a site LAN (workgroup LAN,
intranet, or enterprise LAN) via optional routers, hubs, and/or switches.
PCs and LAN-enabled instruments are not connected to a site LAN.
Getting Started
41
1
Advertisement
Table of Contents
