Documentation Information - Keysight N432A Installation Manual

Documentation Information

This guide is only part of the information provided. The documentation for the
N432A consists of:
– the Installation Guide (this manual)
– the User's Guide
– the Programming Guide
– the Service Guide
Printed guides are available by ordering the following options:
– English-language user's guide – Option ABA and Option 0BK (additional copy)
– Japanese-language user's guide – Option ABJ
A printed Programming Guide is also provided with Option 0BK and ABJ, but in
NOTE
English only. For Option ABA, the printed Programming Guide is available only by
ordering Option 0BF.
There is also a Connectivity Guide available on the Keysight IO Libraries Suite
CD-ROM as a PDF file. This guide helps you to configure your N432A over GPIB,
LAN, and USB remote interfaces.
Keysight N432A Installation Guide
Provides the procedures on how to check your N432A, switch it on, and
connect it to a compatible Keysight thermistor sensor. This information is
presented in English and Japanese.
Describes how to operate your N432A from the front panel interface to make
measurements using a compatible Keysight thermistor sensor. You can locate
the User's Guide on the supplied CD-ROM as a PDF file in English and
Japanese.
Explains how to operate your N432A over a remote interface. You can locate
the Programming Guide on the supplied CD-ROM as a PDF file in English only.
Describes how to carry out performance verification tests and adjustments on
your N432A, as well as provides the disassembly and troubleshooting
information. You can locate the Service Guide on the supplied CD-ROM as a
PDF file in English only.
Getting Started
23
1