Process Image; Table 16: Input Bits - WAGO 750-606 Manual

WAGO-I/O-SYSTEM 750
750-606 24 V DC 1.0 A power supply Ex i
4

Process Image

Mapping of process data in the process image of fieldbus systems
The representation of the I/O modules' process data in the process image
depends on the fieldbus coupler/controller used. Please take this information as
well as the particular design of the respective control/status bytes from the
section "Fieldbus Specific Design of the Process Data" included in the description
concerning the process image of the fieldbus coupler/controller used.

Table 16: Input Bits

S_in 0:
1:
S_out 0:
1:
24 V operating voltage on supply input.
No 24 V operating voltage on supply input.
24 V operating voltage on the power jumper contacts.
No 24 V operating voltage on the power jumper contacts.
Process Image
Version 1.4.0 valid from HW version 03
29
Bit 1 Bit 0
S_out S_in
Manual