Power Jumper Contacts/Field Supply; Figure 3: Power Jumper Contacts; Table 5: Legend For Figure "Power Jumper Contacts - WAGO 750-606 Manual

18 Device Description
3.2.2

Power Jumper Contacts/Field Supply

The power supply module 750-606 has 2 self-cleaning power jumper contacts
that transmit power for the field side. The contacts on the right side of the power
supply module are designed as spring contacts.

Figure 3: Power Jumper Contacts

Table 5: Legend for Figure "Power Jumper Contacts"

Contact
1
2
Do not exceed maximum current via power contacts!
The maximum current available from the 750-606 Ex-i Supply Module is
1000 mA.
Greater currents can damage the power contacts.
When configuring the system, ensure that this current is not exceeded.
If exceeded, an additional potential feed module must be used.
Manual
Version 1.4.0 valid from HW version 03
Type
Spring contact
Spring contact
WAGO-I/O-SYSTEM 750
750-606 24 V DC 1.0 A power supply Ex i
Function
Potential feed-in (U ) for field supply
o
Potential feed-in (0 V) for field supply