Removing The Power Supply Module; Figure 10: Removing The Power Supply Module - WAGO 750-606/040-000 Manual

WAGO I/O SYSTEM 750 XTR
750-606/040-000 Power Supply 24 VDC XTR for Ex i XTR Modules
5.2.2

Removing the Power Supply Module

The power supply module has 2 release tabs.
1. To remove the power supply module, pull it out of the unit on both release
tabs.

Figure 10: Removing the Power Supply Module

Electrical connections for data or power jumper contacts are disconnected when
removing the power supply module.
Mounting 39
Manual
Version 2.0.0